Samsung Galaxy Note 10 Lite firmware N770FZHS8FVA2 is the Android 12 build for the Samsung Galaxy Note 10 Lite (model SM-N770F), released by Samsung for Taiwan (BRI). It was built on 24 January 2022, carries the 2022-02-01 Android security patch, has changelist 23305058. The package combines system build N770FZHS8FVA2 (AP/PDA) with CSC build N770FBRI8FUL7 for the BRI region code. The download is 4.8 GB and has MD5 checksum 25bd1bab8346095ebb96afa65f07ce1a, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 13 February 2022.
How to flash N770FZHS8FVA2 on the Samsung Galaxy Note 10 Lite (SM-N770F)
We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.
Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
Open Odin. The ID:COM box turns blue when the device is connected.
Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.
PDA / AP (N770FZHS8FVA2) is the Android system build; its last three characters encode the year, month and revision.
CSC (N770FBRI8FUL7) is the region and carrier configuration, and CP is the modem firmware.
The product code BRI identifies the region or carrier this package was made for (Taiwan);
our list of Samsung CSC codes maps every code to its country and carrier.
Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.
