Advertisement

Samsung W2020 (SM-W2020) - CHC - W2020ZCU3FVJ3 firmware

Samsung W2020 firmware W2020ZCU3FVJ3 is the Android 12 build for the Samsung W2020 (model SM-W2020), released by Samsung for China (Open China) (CHC). It was built on 19 October 2022, carries the 2022-06-01 Android security patch, has changelist 266399. The package combines system build W2020ZCU3FVJ3 (AP/PDA) with CSC build W2020CHC3FVJ3 for the CHC region code. The download is 6.3 GB and has MD5 checksum ced6cb6e9f241de42b6478c29788c6ca, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 26 October 2022.

Country
Model SM-W2020
Product Code CHC
Security Patch 2022-06-01
OS Version Android 12
PDA W2020ZCU3FVJ3
CSC W2020CHC3FVJ3
Build Date 2022-10-19
Changelist 266399
File size 6.3 GB (6,782,609,810 bytes)
MD5 ced6cb6e9f241de42b6478c29788c6ca

How to flash W2020ZCU3FVJ3 on the Samsung W2020 (SM-W2020)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (W2020ZCU3FVJ3) is the Android system build; its last three characters encode the year, month and revision. CSC (W2020CHC3FVJ3) is the region and carrier configuration, and CP is the modem firmware. The product code CHC identifies the region or carrier this package was made for (China (Open China)); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.