Download Samsung Galaxy S6 edge SM-G925I OPS Australia (Optus) G925IDVS3FRAH firmware

Android 7.0

Download the Samsung firmware for the Galaxy S6 edge SM-G925I with product code OPS from Australia (Optus). This firmware has version number PDA G925IDVS3FRAH and CSC G925IOPS3FRA3. The operating system of this firmware is Android 7.0 , with build date N/A. Security patch date is N/A, with changelist 0.

Model	SM-G925I
Model name	Galaxy S6 edge
Country
Version	Android 7.0
Changelist	0
Build date	N/A
Security Patch Level	N/A
Product code	OPS
PDA	G925IDVS3FRAH
CSC	G925IOPS3FRA3

Archived firmware, premium users only Approx. 15 kB/Sec
Non-Premium Members

Fast download

Premium Members only
Test your speed here
Help with download

Download Odin v3.14.4

Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to its respective field in Odin v3.14.4. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.

Download Odin v3.14.4
Extract the firmware file you just downloaded. You should get 1 file:
AP (System &Recovery)
Add MD5-file in AP-field in Odin
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.