Download Samsung Galaxy S20 Ultra SM-G988B PEO Peru G988BXXU2ATE6 firmware

Android 10

Download the Samsung firmware for the Galaxy S20 Ultra SM-G988B with product code PEO from Peru. This firmware has version number PDA G988BXXU2ATE6 and CSC G988BOXM2ATE6. The operating system of this firmware is Android 10 , with build date Thu, 14 May 2020 08:47:11 +0000. Security patch date is 2020-05-01, with changelist 18598659.

Model	SM-G988B
Model name	Galaxy S20 Ultra
Country
Version	Android 10
Changelist	18598659
Build date	Thu, 14 May 2020 08:47:11 +0000
Security Patch Level	2020-05-01
Product code	PEO
PDA	G988BXXU2ATE6
CSC	G988BOXM2ATE6

Join to Download Approx. 15 kB/Sec
Non-Premium Members

Fast download

Premium Members only
Test your speed here
Help with download

Download Odin v3.14.4

Extract the firmware file you just downloaded. You should get 5 files:
AP (System &Recovery)
BL (Bootloader)
CP (Modem / Radio)
CSC_*** (Country / Region / Operator)
HOME_CSC_*** (Country / Region / Operator)
Add each file to its respective field in Odin v3.14.4. Use CSC_*** if you want to do a clean flash or HOME_CSC_*** if you want to keep your apps and data.
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.

Download Odin v3.14.4
Extract the firmware file you just downloaded. You should get 1 file:
AP (System &Recovery)
Add MD5-file in AP-field in Odin
Reboot your phone in Download / Odin mode (make sure your device is off) with the following button combo: POWER + VOLUME DOWN + BIXBY
Other options in case first option did not work or isn't possible.
Option 2 VOLUME DOWN + VOLUME UP then USB cable
Option 3 POWER + VOLUME DOWN + VOLUME UP
Option 4 POWER + VOLUME DOWN + HOME BUTTON
Option 5 (Note9) USB cable + VOLUME DOWN + BIXBY
Option 6 (Note10) POWER + VOLUME UP
Once in download mode, connect your phone to the PC, preferably using the original USB cable you got with your phone. Odin should detect your device and a BLUE box will show up with the COM port number. (Be sure, the SAMSUNG-drivers are installed on your PC!)
Do NOT tick any extra boxes. The only options to be ticked are F.Reset Time and Auto-Reboot.
Click the start button, wait for Odin to say 'PASS' in a GREEN box. Once the flash is complete, your phone will reboot, and you can disconnect your phone from the PC.