Samsung Galaxy Note 10+ (SM-N976N) - KOO - N976NKSU1BSLB firmware
Samsung Galaxy Note 10+ firmware N976NKSU1BSLB is the Android 10 build for the Samsung Galaxy Note 10+ (model SM-N976N), released by Samsung for Korea (KOO). It was built on 24 December 2019, carries the 2019-12-01 Android security patch, has changelist 17472819. The package combines system build N976NKSU1BSLB (AP/PDA) with CSC build N976NOKR1BSLB for the KOO region code. The download is 4.7 GB and has MD5 checksum c10b4ebfc176e5a1f1379a7ad30d1b34, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 5 January 2020.
How to flash N976NKSU1BSLB on the Samsung Galaxy Note 10+ (SM-N976N)
We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.
- Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
- Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
- Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
- Open Odin. The ID:COM box turns blue when the device is connected.
- Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
- Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.
Step-by-step PDFs: 5-file firmware and 1-file firmware.
What the build numbers mean
PDA / AP (N976NKSU1BSLB) is the Android system build; its last three characters encode the year, month and revision. CSC (N976NOKR1BSLB) is the region and carrier configuration, and CP is the modem firmware. The product code KOO identifies the region or carrier this package was made for (Korea); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.