Samsung Galaxy A51 (SM-A515U1) - FKR - A515U1UES8DVI1 firmware

Samsung Galaxy A51 firmware A515U1UES8DVI1 is the Android 12 build for the Samsung Galaxy A51 (model SM-A515U1), released by Samsung for USA (FKR). It was built on 28 September 2022, carries the 2022-10-01 Android security patch, has changelist 24700230. The package combines system build A515U1UES8DVI1 (AP/PDA) with CSC build A515U1OYM8DVI1 for the FKR region code. The download is 4.5 GB and has MD5 checksum 21c99f7ce2bb6acdba1feca65f3afe90, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 20 October 2022.

Country
Model SM-A515U1
Product Code FKR
Security Patch 2022-10-01
OS Version Android 12
PDA A515U1UES8DVI1
CSC A515U1OYM8DVI1
Build Date 2022-09-28
Changelist 24700230
File size 4.5 GB (4,845,577,822 bytes)
MD5 21c99f7ce2bb6acdba1feca65f3afe90

How to flash A515U1UES8DVI1 on the Samsung Galaxy A51 (SM-A515U1)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (A515U1UES8DVI1) is the Android system build; its last three characters encode the year, month and revision. CSC (A515U1OYM8DVI1) is the region and carrier configuration, and CP is the modem firmware. The product code FKR identifies the region or carrier this package was made for (USA); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.