Samsung SGH-I747M (SGH-I747M) - BMC - I747MVLALH1 firmware
Samsung SGH-I747M firmware I747MVLALH1 is the official build for the Samsung SGH-I747M (model SGH-I747M), released by Samsung for Canada (Bell Mobile) (BMC). The package combines system build I747MVLALH1 (AP/PDA) with CSC build I747MOYCALH1 for the BMC region code. The download is 725 MB and has MD5 checksum 70c35e4a3a7528d483f74c413cc6f5ec, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 15 August 2012.
How to flash I747MVLALH1 on the Samsung SGH-I747M (SGH-I747M)
We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.
- Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
- Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
- Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
- Open Odin. The ID:COM box turns blue when the device is connected.
- Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
- Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.
Step-by-step PDFs: 5-file firmware and 1-file firmware.
What the build numbers mean
PDA / AP (I747MVLALH1) is the Android system build; its last three characters encode the year, month and revision. CSC (I747MOYCALH1) is the region and carrier configuration, and CP is the modem firmware. The product code BMC identifies the region or carrier this package was made for (Canada (Bell Mobile)); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.