Samsung Galaxy Z Fold 4 (SM-F936U1) - USC - F936U1UES1AVII firmware
Samsung Galaxy Z Fold 4 firmware F936U1UES1AVII is the Android 12 build for the Samsung Galaxy Z Fold 4 (model SM-F936U1), released by Samsung for USA (US Cellular) (USC). It was built on 27 September 2022, carries the 2022-10-01 Android security patch, has changelist 25063250. The package combines system build F936U1UES1AVII (AP/PDA) with CSC build F936U1OYM1AVII for the USC region code. SamMobile added this file to the firmware archive on 12 October 2022.
How to flash F936U1UES1AVII on the Samsung Galaxy Z Fold 4 (SM-F936U1)
We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.
- Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
- Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
- Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
- Open Odin. The ID:COM box turns blue when the device is connected.
- Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
- Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.
Step-by-step PDFs: 5-file firmware and 1-file firmware.
What the build numbers mean
PDA / AP (F936U1UES1AVII) is the Android system build; its last three characters encode the year, month and revision. CSC (F936U1OYM1AVII) is the region and carrier configuration, and CP is the modem firmware. The product code USC identifies the region or carrier this package was made for (USA (US Cellular)). Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.