Samsung Galaxy Z Flip 5G (SM-F707U) - SPR - F707USQS2FVD3 firmware
Samsung Galaxy Z Flip 5G firmware F707USQS2FVD3 is the Android 12 build for the Samsung Galaxy Z Flip 5G (model SM-F707U), released by Samsung for Spint (cdma) (SPR). It was built on 5 April 2022, carries the 2022-04-01 Android security patch, has changelist 23723182. The package combines system build F707USQS2FVD3 (AP/PDA) with CSC build F707UOYN2FVD3 for the SPR region code. The download is 6.0 GB and has MD5 checksum a933bf0fdcd275381e9181539016a5cb, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 21 April 2022.
How to flash F707USQS2FVD3 on the Samsung Galaxy Z Flip 5G (SM-F707U)
We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.
- Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
- Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
- Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
- Open Odin. The ID:COM box turns blue when the device is connected.
- Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
- Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.
Step-by-step PDFs: 5-file firmware and 1-file firmware.
What the build numbers mean
PDA / AP (F707USQS2FVD3) is the Android system build; its last three characters encode the year, month and revision. CSC (F707UOYN2FVD3) is the region and carrier configuration, and CP is the modem firmware. The product code SPR identifies the region or carrier this package was made for (Spint (cdma)); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.