Samsung Galaxy Tab S4 (SM-T835N) - KOO - T835NKOU1ARGH firmware
Samsung Galaxy Tab S4 firmware T835NKOU1ARGH is the Android 8.1.0 build for the Samsung Galaxy Tab S4 (model SM-T835N), released by Samsung for Korea (KOO). It was built on 21 July 2018, carries the 2018-06-01 Android security patch, has changelist 13953229. The package combines system build T835NKOU1ARGH (AP/PDA) with CSC build T835NKOO1ARGH for the KOO region code. The download is 3.2 GB and has MD5 checksum 61f59d64c4d8de8ef8f6cef0887a79ac, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 26 July 2018.
How to flash T835NKOU1ARGH on the Samsung Galaxy Tab S4 (SM-T835N)
We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.
- Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
- Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
- Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
- Open Odin. The ID:COM box turns blue when the device is connected.
- Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
- Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.
Step-by-step PDFs: 5-file firmware and 1-file firmware.
What the build numbers mean
PDA / AP (T835NKOU1ARGH) is the Android system build; its last three characters encode the year, month and revision. CSC (T835NKOO1ARGH) is the region and carrier configuration, and CP is the modem firmware. The product code KOO identifies the region or carrier this package was made for (Korea); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.