Advertisement

Samsung Galaxy Tab S 8.4 (SCT22) - KDI - SCT22KDU3BXDF firmware

Samsung Galaxy Tab S 8.4 firmware SCT22KDU3BXDF is the Android 14 build for the Samsung Galaxy Tab S 8.4 (model SCT22), released by Samsung for Japan (AU KDDI) (KDI). It was built on 26 April 2024, carries the 2024-04-01 Android security patch, has changelist 28579955. The package combines system build SCT22KDU3BXDF (AP/PDA) with CSC build SCT22QDI3BXDF for the KDI region code. The download is 6.4 GB and has MD5 checksum 15dcf8a60107a42af2071b6fd9e9018d, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 7 September 2026.

Country
Model SCT22
Product Code KDI
Security Patch 2024-04-01
OS Version Android 14
PDA SCT22KDU3BXDF
CSC SCT22QDI3BXDF
Build Date 2024-04-26
Changelist 28579955
File size 6.4 GB (6,898,816,665 bytes)
MD5 15dcf8a60107a42af2071b6fd9e9018d

How to flash SCT22KDU3BXDF on the Samsung Galaxy Tab S 8.4 (SCT22)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (SCT22KDU3BXDF) is the Android system build; its last three characters encode the year, month and revision. CSC (SCT22QDI3BXDF) is the region and carrier configuration, and CP is the modem firmware. The product code KDI identifies the region or carrier this package was made for (Japan (AU KDDI)); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.