Advertisement

Samsung Galaxy Tab A7 (SM-T500) - SER - T500XXU3AUC6 firmware

Samsung Galaxy Tab A7 firmware T500XXU3AUC6 is the Android 10 build for the Samsung Galaxy Tab A7 (model SM-T500), released by Samsung for Russia (SER). It was built on 11 March 2021, carries the 2021-03-01 Android security patch, has changelist 20288130. The package combines system build T500XXU3AUC6 (AP/PDA) with CSC build T500OXM3AUC7 for the SER region code. The download is 3.2 GB and has MD5 checksum 4051c595f6d9b25a5cf8a62e38dd6cd7, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 11 September 2026.

Country
Model SM-T500
Product Code SER
Security Patch 2021-03-01
OS Version Android 10
PDA T500XXU3AUC6
CSC T500OXM3AUC7
Build Date 2021-03-11
Changelist 20288130
File size 3.2 GB (3,460,518,407 bytes)
MD5 4051c595f6d9b25a5cf8a62e38dd6cd7

How to flash T500XXU3AUC6 on the Samsung Galaxy Tab A7 (SM-T500)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (T500XXU3AUC6) is the Android system build; its last three characters encode the year, month and revision. CSC (T500OXM3AUC7) is the region and carrier configuration, and CP is the modem firmware. The product code SER identifies the region or carrier this package was made for (Russia); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.