Samsung GALAXY Tab 10.1 firmware P7500XWMPI is the Android 4.0.4 build for the Samsung GALAXY Tab 10.1 (model GT-P7500), released by Samsung for Sweden (Telia) (NSE). It was built on 17 January 2013, has changelist 1194905. The package combines system build P7500XWMPI (AP/PDA) with CSC build P7500OXXMP9 for the NSE region code. The download is 427 MB and has MD5 checksum 7f8276ac5d4a15501002f12bb796c50b, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 25 February 2013.
How to flash P7500XWMPI on the Samsung GALAXY Tab 10.1 (GT-P7500)
We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.
Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
Open Odin. The ID:COM box turns blue when the device is connected.
Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.
PDA / AP (P7500XWMPI) is the Android system build; its last three characters encode the year, month and revision.
CSC (P7500OXXMP9) is the region and carrier configuration, and CP is the modem firmware.
The product code NSE identifies the region or carrier this package was made for (Sweden (Telia));
our list of Samsung CSC codes maps every code to its country and carrier.
Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.
