Samsung Galaxy S7 firmware G930FXXU8EUE1 is the Android 8.0.0 build for the Samsung Galaxy S7 (model SM-G930F), released by Samsung for United Kingdom (H3G) (H3G). It was built on 26 May 2021, carries the 2021-01-01 Android security patch, has changelist 21826506. The package combines system build G930FXXU8EUE1 (AP/PDA) with CSC build G930FH3G8EUE1 for the H3G region code. The download is 2.3 GB and has MD5 checksum fb60e44dddf2d6a1dbc9e4825045cb83, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 30 June 2021.
How to flash G930FXXU8EUE1 on the Samsung Galaxy S7 (SM-G930F)
We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.
Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
Open Odin. The ID:COM box turns blue when the device is connected.
Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.
PDA / AP (G930FXXU8EUE1) is the Android system build; its last three characters encode the year, month and revision.
CSC (G930FH3G8EUE1) is the region and carrier configuration, and CP is the modem firmware.
The product code H3G identifies the region or carrier this package was made for (United Kingdom (H3G));
our list of Samsung CSC codes maps every code to its country and carrier.
Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.
