Advertisement

Samsung Galaxy S5 (SM-G900M) - COO - G900MUBU1CQD3 firmware

Samsung Galaxy S5 firmware G900MUBU1CQD3 is the Android 6.0.1 build for the Samsung Galaxy S5 (model SM-G900M), released by Samsung for Colombia (COO). It was built on 28 April 2017, carries the 2017-04-01 Android security patch, has changelist 9730335. The package combines system build G900MUBU1CQD3 (AP/PDA) with CSC build G900MCOO1CQD1 for the COO region code. The download is 2.0 GB and has MD5 checksum 0e6a421fa4c4882ec06a47e500749a67, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 20 September 2026.

Country
Model SM-G900M
Product Code COO
Security Patch 2017-04-01
OS Version Android 6.0.1
PDA G900MUBU1CQD3
CSC G900MCOO1CQD1
Build Date 2017-04-28
Changelist 9730335
File size 2.0 GB (2,107,746,236 bytes)
MD5 0e6a421fa4c4882ec06a47e500749a67

How to flash G900MUBU1CQD3 on the Samsung Galaxy S5 (SM-G900M)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (G900MUBU1CQD3) is the Android system build; its last three characters encode the year, month and revision. CSC (G900MCOO1CQD1) is the region and carrier configuration, and CP is the modem firmware. The product code COO identifies the region or carrier this package was made for (Colombia); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.