Advertisement

Samsung GALAXY S4 (SGH-I337M) - TTT - I337MUMUAMJ1 firmware

Samsung GALAXY S4 firmware I337MUMUAMJ1 is the Android 4.2.2 build for the Samsung GALAXY S4 (model SGH-I337M), released by Samsung for Trinidad and Tobago (TTT). It was built on 23 October 2013, has changelist 1950406. The package combines system build I337MUMUAMJ1 (AP/PDA) with CSC build I337MTTTAMJ1 for the TTT region code. The download is 1.3 GB and has MD5 checksum f11ce4bd1d6cfc3b3e1dcdd17ea52eff, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 16 December 2013.

Country
Model SGH-I337M
Product Code TTT
Security Patch
OS Version Android 4.2.2
PDA I337MUMUAMJ1
CSC I337MTTTAMJ1
Build Date 2013-10-23
Changelist 1950406
File size 1.3 GB (1,429,773,684 bytes)
MD5 f11ce4bd1d6cfc3b3e1dcdd17ea52eff

How to flash I337MUMUAMJ1 on the Samsung GALAXY S4 (SGH-I337M)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (I337MUMUAMJ1) is the Android system build; its last three characters encode the year, month and revision. CSC (I337MTTTAMJ1) is the region and carrier configuration, and CP is the modem firmware. The product code TTT identifies the region or carrier this package was made for (Trinidad and Tobago); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.