Samsung Galaxy S25 (SM-S9310) - CHC - S9310ZCSABZD1 firmware
Samsung Galaxy S25 firmware S9310ZCSABZD1 is the Android 16 build for the Samsung Galaxy S25 (model SM-S9310), released by Samsung for China (Open China) (CHC). It was built on 7 April 2026, carries the 2026-02-05 Android security patch, has changelist 2755240. The package combines system build S9310ZCSABZD1 (AP/PDA) with CSC build S9310CHCABZD1 for the CHC region code. The download is 18.1 GB and has MD5 checksum f164a182c4761cb43a0cacda1ff9b3be, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 7 April 2026.
How to flash S9310ZCSABZD1 on the Samsung Galaxy S25 (SM-S9310)
We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.
- Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
- Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
- Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
- Open Odin. The ID:COM box turns blue when the device is connected.
- Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
- Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.
Step-by-step PDFs: 5-file firmware and 1-file firmware.
What the build numbers mean
PDA / AP (S9310ZCSABZD1) is the Android system build; its last three characters encode the year, month and revision. CSC (S9310CHCABZD1) is the region and carrier configuration, and CP is the modem firmware. The product code CHC identifies the region or carrier this package was made for (China (Open China)); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.