Samsung Galaxy S25 Plus (SM-S936W) - GLW - S936WVLU2AYD9 firmware
Samsung Galaxy S25 Plus firmware S936WVLU2AYD9 is the Android 15 build for the Samsung Galaxy S25 Plus (model SM-S936W), released by Samsung for Canada (Globalive Wind Mobile) (GLW). It was built on 8 April 2025, carries the 2025-04-01 Android security patch, has changelist 30454035. The package combines system build S936WVLU2AYD9 (AP/PDA) with CSC build S936WOYV2AYD9 for the GLW region code. The download is 16.5 GB and has MD5 checksum d78f4e8e7f0c6a58c0f9b59421981a9f, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 21 April 2025.
How to flash S936WVLU2AYD9 on the Samsung Galaxy S25 Plus (SM-S936W)
We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.
- Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
- Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
- Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
- Open Odin. The ID:COM box turns blue when the device is connected.
- Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
- Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.
Step-by-step PDFs: 5-file firmware and 1-file firmware.
What the build numbers mean
PDA / AP (S936WVLU2AYD9) is the Android system build; its last three characters encode the year, month and revision. CSC (S936WOYV2AYD9) is the region and carrier configuration, and CP is the modem firmware. The product code GLW identifies the region or carrier this package was made for (Canada (Globalive Wind Mobile)); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.