Advertisement

Samsung Galaxy S23 FE (SM-S711U) - TMK - S711USQS6EYK1 firmware

Samsung Galaxy S23 FE firmware S711USQS6EYK1 is the Android 16 build for the Samsung Galaxy S23 FE (model SM-S711U), released by Samsung for USA (MetroPCS) (TMK). It was built on 11 November 2025, carries the 2025-11-01 Android security patch, has changelist 31998945. The package combines system build S711USQS6EYK1 (AP/PDA) with CSC build S711UOYN6EYK1 for the TMK region code. The download is 9.8 GB and has MD5 checksum 4f0a39321e92fc69062848ea7be8d3db, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 19 November 2025.

Country
Model SM-S711U
Product Code TMK
Security Patch 2025-11-01
OS Version Android 16
PDA S711USQS6EYK1
CSC S711UOYN6EYK1
Build Date 2025-11-11
Changelist 31998945
File size 9.8 GB (10,557,206,958 bytes)
MD5 4f0a39321e92fc69062848ea7be8d3db

How to flash S711USQS6EYK1 on the Samsung Galaxy S23 FE (SM-S711U)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (S711USQS6EYK1) is the Android system build; its last three characters encode the year, month and revision. CSC (S711UOYN6EYK1) is the region and carrier configuration, and CP is the modem firmware. The product code TMK identifies the region or carrier this package was made for (USA (MetroPCS)); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.