Advertisement

Samsung Galaxy S20 (SM-G981B) - 3IE - G981BXXSADUH5 firmware

Samsung Galaxy S20 firmware G981BXXSADUH5 is the Android 11 build for the Samsung Galaxy S20 (model SM-G981B), released by Samsung for Ireland (Three) (3IE). It was built on 19 August 2021, carries the 2021-09-01 Android security patch, has changelist 22307792. The package combines system build G981BXXSADUH5 (AP/PDA) with CSC build G981BOXMADUH5 for the 3IE region code. The download is 6.3 GB and has MD5 checksum 6ed5d949f9764dea00751d2c852d47d0, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 1 September 2021.

Country
Model SM-G981B
Product Code 3IE
Security Patch 2021-09-01
OS Version Android 11
PDA G981BXXSADUH5
CSC G981BOXMADUH5
Build Date 2021-08-19
Changelist 22307792
File size 6.3 GB (6,763,900,551 bytes)
MD5 6ed5d949f9764dea00751d2c852d47d0

How to flash G981BXXSADUH5 on the Samsung Galaxy S20 (SM-G981B)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (G981BXXSADUH5) is the Android system build; its last three characters encode the year, month and revision. CSC (G981BOXMADUH5) is the region and carrier configuration, and CP is the modem firmware. The product code 3IE identifies the region or carrier this package was made for (Ireland (Three)); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.