Samsung GALAXY Note Edge (SM-N915G) - INU - N915GXXU1DPE3 firmware

Samsung GALAXY Note Edge firmware N915GXXU1DPE3 is the Android 6.0.1 build for the Samsung GALAXY Note Edge (model SM-N915G), released by Samsung for India (INU). It was built on 10 May 2016, carries the 2016-05-01 Android security patch, has changelist 7370862. The package combines system build N915GXXU1DPE3 (AP/PDA) with CSC build N915GODD1DPE2 for the INU region code. The download is 2.0 GB and has MD5 checksum ec91080070dcdac412cd17013067bba8, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 1 June 2016.

Country
Model SM-N915G
Product Code INU
Security Patch 2016-05-01
OS Version Android 6.0.1
PDA N915GXXU1DPE3
CSC N915GODD1DPE2
Build Date 2016-05-10
Changelist 7370862
File size 2.0 GB (2,174,480,096 bytes)
MD5 ec91080070dcdac412cd17013067bba8

How to flash N915GXXU1DPE3 on the Samsung GALAXY Note Edge (SM-N915G)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (N915GXXU1DPE3) is the Android system build; its last three characters encode the year, month and revision. CSC (N915GODD1DPE2) is the region and carrier configuration, and CP is the modem firmware. The product code INU identifies the region or carrier this package was made for (India); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.