Advertisement

Samsung Galaxy M21 2021 (SM-M215G) - INS - M215GDDS1AUL1 firmware

Samsung Galaxy M21 2021 firmware M215GDDS1AUL1 is the Android 11 build for the Samsung Galaxy M21 2021 (model SM-M215G), released by Samsung for India (INS). It was built on 13 December 2021, carries the 2021-12-01 Android security patch, has changelist 22384011. The package combines system build M215GDDS1AUL1 (AP/PDA) with CSC build M215GODM1AUI3 for the INS region code. The download is 4.5 GB and has MD5 checksum a57be61da79ec2b2ca7f6767a4724543, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 13 December 2021.

Country
Model SM-M215G
Product Code INS
Security Patch 2021-12-01
OS Version Android 11
PDA M215GDDS1AUL1
CSC M215GODM1AUI3
Build Date 2021-12-13
Changelist 22384011
File size 4.5 GB (4,819,348,012 bytes)
MD5 a57be61da79ec2b2ca7f6767a4724543

How to flash M215GDDS1AUL1 on the Samsung Galaxy M21 2021 (SM-M215G)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (M215GDDS1AUL1) is the Android system build; its last three characters encode the year, month and revision. CSC (M215GODM1AUI3) is the region and carrier configuration, and CP is the modem firmware. The product code INS identifies the region or carrier this package was made for (India); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.