Advertisement

Samsung Galaxy J6 (SM-J600FN) - BOG - J600FNXXU8CTF5 firmware

Samsung Galaxy J6 firmware J600FNXXU8CTF5 is the Android 10 build for the Samsung Galaxy J6 (model SM-J600FN), released by Samsung for France (Bouygues) (BOG). It was built on 11 June 2020, carries the 2020-06-01 Android security patch, has changelist 18765881. The package combines system build J600FNXXU8CTF5 (AP/PDA) with CSC build J600FNBOG8CTF5 for the BOG region code. The download is 2.9 GB and has MD5 checksum 171b218f8d8c58263484a416e057f8c4, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 23 June 2020.

Country
Model SM-J600FN
Product Code BOG
Security Patch 2020-06-01
OS Version Android 10
PDA J600FNXXU8CTF5
CSC J600FNBOG8CTF5
Build Date 2020-06-11
Changelist 18765881
File size 2.9 GB (3,104,457,413 bytes)
MD5 171b218f8d8c58263484a416e057f8c4

How to flash J600FNXXU8CTF5 on the Samsung Galaxy J6 (SM-J600FN)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (J600FNXXU8CTF5) is the Android system build; its last three characters encode the year, month and revision. CSC (J600FNBOG8CTF5) is the region and carrier configuration, and CP is the modem firmware. The product code BOG identifies the region or carrier this package was made for (France (Bouygues)); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.