Samsung Galaxy A8 2018 firmware A530FXXSCCTEA is the Android 9 build for the Samsung Galaxy A8 2018 (model SM-A530F), released by Samsung for Unknown (DOO). It was built on 12 May 2020, carries the 2020-05-01 Android security patch, has changelist 17656523. The package combines system build A530FXXSCCTEA (AP/PDA) with CSC build A530FUWBCCTE1 for the DOO region code. The download is 3.0 GB and has MD5 checksum b2e2033ef5fd14c07f4403becdd9155c, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 21 May 2020.
How to flash A530FXXSCCTEA on the Samsung Galaxy A8 2018 (SM-A530F)
We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.
Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
Open Odin. The ID:COM box turns blue when the device is connected.
Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.
PDA / AP (A530FXXSCCTEA) is the Android system build; its last three characters encode the year, month and revision.
CSC (A530FUWBCCTE1) is the region and carrier configuration, and CP is the modem firmware.
The product code DOO identifies the region or carrier this package was made for (Unknown);
our list of Samsung CSC codes maps every code to its country and carrier.
Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.
