Advertisement

Samsung Galaxy A04s (SM-A047M) - CHO - A047MUBS1BWC2 firmware

Samsung Galaxy A04s firmware A047MUBS1BWC2 is the Android 13 build for the Samsung Galaxy A04s (model SM-A047M), released by Samsung for Chile (CHO). It was built on 9 March 2023, carries the 2023-03-01 Android security patch, has changelist 25467655. The package combines system build A047MUBS1BWC2 (AP/PDA) with CSC build A047MOWO1BWC2 for the CHO region code. The download is 4.5 GB and has MD5 checksum b5214bdae6b69ebe60fca7e78599b02f, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 2 April 2023.

Country
Model SM-A047M
Product Code CHO
Security Patch 2023-03-01
OS Version Android 13
PDA A047MUBS1BWC2
CSC A047MOWO1BWC2
Build Date 2023-03-09
Changelist 25467655
File size 4.5 GB (4,882,605,829 bytes)
MD5 b5214bdae6b69ebe60fca7e78599b02f

How to flash A047MUBS1BWC2 on the Samsung Galaxy A04s (SM-A047M)

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (A047MUBS1BWC2) is the Android system build; its last three characters encode the year, month and revision. CSC (A047MOWO1BWC2) is the region and carrier configuration, and CP is the modem firmware. The product code CHO identifies the region or carrier this package was made for (Chile); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.