Advertisement

Samsung (SM-T817A) - ATT - T817AUCU2CQE3 firmware

Samsung SM-T817A firmware T817AUCU2CQE3 is the Android 7.0 build for the Samsung SM-T817A, released by Samsung for USA (AT&T) (ATT). It was built on 11 May 2017, carries the 2017-05-01 Android security patch, has changelist 11232662. The package combines system build T817AUCU2CQE3 (AP/PDA) with CSC build T817AATT2CQE3 for the ATT region code. The download is 1.8 GB and has MD5 checksum 2a1e5352ee746eb26f72b7b400ee0b8d, so you can verify the file after downloading. SamMobile added this file to the firmware archive on 11 May 2017.

Country
Model SM-T817A
Product Code ATT
Security Patch 2017-05-01
OS Version Android 7.0
PDA T817AUCU2CQE3
CSC T817AATT2CQE3
Build Date 2017-05-11
Changelist 11232662
File size 1.8 GB (1,940,916,064 bytes)
MD5 2a1e5352ee746eb26f72b7b400ee0b8d

How to flash T817AUCU2CQE3 on the Samsung SM-T817A

We recommend updating through Samsung's own tools: over-the-air (Settings › Software update) or Samsung Smart Switch on a PC. Flash the full firmware with Odin only when you are sure about the risks. A wrong region or a failed flash can brick the device, and SamMobile is not responsible for any damage.

  1. Download the firmware package above and extract the ZIP. It contains the AP (PDA), BL, CP and CSC files, plus a HOME_CSC file.
  2. Download and extract Odin on a Windows PC, and install the Samsung USB drivers if the PC does not detect the phone.
  3. Switch the device off and boot it into Download mode (usually Volume Up + Volume Down while connecting the USB cable, or Volume Down + Bixby + Power on older models).
  4. Open Odin. The ID:COM box turns blue when the device is connected.
  5. Load the files in their slots: BL, AP, CP and CSC. Use HOME_CSC to keep your apps and data, CSC to wipe the device.
  6. Leave Re-Partition unticked and click Start. The device reboots when Odin shows PASS. The first boot after a flash can take a few minutes.

Step-by-step PDFs: 5-file firmware and 1-file firmware.

What the build numbers mean

PDA / AP (T817AUCU2CQE3) is the Android system build; its last three characters encode the year, month and revision. CSC (T817AATT2CQE3) is the region and carrier configuration, and CP is the modem firmware. The product code ATT identifies the region or carrier this package was made for ( USA (AT&T)); our list of Samsung CSC codes maps every code to its country and carrier. Flashing a package for a different product code changes carrier features and can be refused by the bootloader, so pick the one that matches the CSC shown under Settings › About phone › Software information.