Results 1 to 6 of 6

Thread: Replace Carrier branded firmware

  1. #1
    Junior Member
    Join Date
    Mar 2021
    Posts
    3

    Replace Carrier branded firmware

    Hello,
    I have an s10e that was originally purchased for ATT. It is unlocked and I use it on Google Fi. It no longer receives updates since it is not on the ATT network. Is it safe to flash it with the unbranded firmware?

  2. #2
    Administrator
    Join Date
    Jul 2012
    Posts
    9,633
    Quote Originally Posted by bwf93 View Post
    Hello,
    I have an s10e that was originally purchased for ATT. It is unlocked and I use it on Google Fi. It no longer receives updates since it is not on the ATT network. Is it safe to flash it with the unbranded firmware?
    Hi there

    Could you go to Software Info on your device, screenshot it from top to bottom and post it here?

  3. #3
    Junior Member
    Join Date
    Mar 2021
    Posts
    3
    Click image for larger version. 

Name:	Screenshot_20210307-124956_Settings.jpg 
Views:	10 
Size:	406.5 KB 
ID:	16953

    Here is the software information.

  4. #4
    Administrator
    Join Date
    Jul 2012
    Posts
    9,633
    Quote Originally Posted by bwf93 View Post
    Click image for larger version. 

Name:	Screenshot_20210307-124956_Settings.jpg 
Views:	10 
Size:	406.5 KB 
ID:	16953

    Here is the software information.
    1. Download SmartSwitch for PC (NOT to be used, just for the correct drivers): https://www.sammobile.com/samsung-smart-switch/
    2. Download Odin 3.14.x: https://dl2018.sammobile.com/Odin3-v3.14.4.zip
    3. Download latest firmware for Multi-CSC OYN: https://www.sammobile.com/samsung/ga...4FUA1/1459261/

    How to flash firmware to your phone:



    1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
    2. Download Odin v3.14.4
    3. Extract Odin ZIP file (i.e. to folder c:\Odin)
    4. Open Odin v3.14.4
    5. Power OFF your S10e
    6. Reboot Phone in Download Mode: Connect USB-cable to your computer. Hold down "Volume up" and "Volume down" at same time. While holding down, connect the USB-cable to your phone.
    7. Wait until you get a blue sign in Odin
    8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
    9. Make sure re-partition is NOT ticked
    10. Click the start button, sit back and wait few minutes

    Note: use USB-A -> USB-C cable

    Use SamMobile only if you are 100% sure about the risks involved in flashing your device. SamMobile is not responsible for any damage caused by using the files on this website.

  5. #5
    Junior Member
    Join Date
    Mar 2021
    Posts
    3
    Thank you it worked perfectly.

  6. #6
    Junior Member
    Join Date
    Feb 2021
    Posts
    9
    Hi, do you see any app crashes because i have flashed my s10+ and after the flashing some of the apps closes while using them.

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •