Last edited by sarozz000; 24-02-2021 at 07:26.
Hi there
1. Download SmartSwitch for PC (NOT to be used, just for the correct drivers): https://www.sammobile.com/samsung-smart-switch/
2. Download Odin 3.14.x: https://dl2018.sammobile.com/Odin3-v3.14.4.zip
3. Download latest firmware for Multi-CSC OYN: https://www.sammobile.com/samsung/ga...9FUB2/1434004/
How to flash firmware to your phone:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your S9+
6. Reboot Phone in Download Mode: https://www.youtube.com/watch?v=ehR_ngZoKTQ
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
Note: use USB-A -> USB-C cable
Use SamMobile only if you are 100% sure about the risks involved in flashing your device. SamMobile is not responsible for any damage caused by using the files on this website.
Hi Sir;
Can I download SM-G965U1 with product code ATT from USA (AT&T). This firmware has version number PDA G965U1UES9FUB1 and CSC G965U1OYM9FUB1 or SM-G965U with product code XAS from Unknown. This firmware has version number PDA G965USQS9FUB2 and CSC G965UOYN9FUB2.
Thank you sir