Can i use the t-mobile, or any us variant Android 11 firmware to update my Att software to Android 11? If I remember correctly the att variant is common or universal?
Thank you for your screenshots
1. Download SmartSwitch for PC (NOT to be used, just for the drivers): https://www.sammobile.com/samsung-smart-switch/
2. Download Odin 3.14.x: https://dl2018.sammobile.com/Odin3-v3.14.4.zip
3. Download latest firmware for Multi-CSC OYN: https://www.sammobile.com/samsung/ga...1CTL2/1034519/
How to flash firmware to your phone:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download Odin v3.14.4
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your Note20 Ultra 5G
6. Reboot Phone in Download Mode: Connect USB-cable to your computer. Hold down "Volume up" and "Volume down" at same time. While holding down, connect the USB-cable to your phone.
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
Use SamMobile only if you are 100% sure about the risks involved in flashing your device. SamMobile is not responsible for any damage caused by using the files on this website.
Worked Beautifully, thanks!
I have the same exact specs as the OP, but there has been a new firmware update since this post, where can I find that one, or should I use the same one you provided?
thank you.
Last edited by xxgodfatherxx; 19-01-2021 at 04:03.
Hi there
Assuming you've the same device: https://www.sammobile.com/samsung/ga...1CTLC/1162190/
Thank you! I am going to try this now. Fingers Crossed!