unable to flash Samsung Galaxy S7 edge SM-G935F

[drude12]

I need your help because my phone is no more able to boot after a update. I tried to flash my phone with Odin but I received always the fail error.

I tried several versions of odin but always the same result.

<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 3975 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I hope that someone could help me!

[henklbr]

I need your help because my phone is no more able to boot after a update. I tried to flash my phone with Odin but I received always the fail error.

I tried several versions of odin but always the same result.

<ID:0/004> Added!!
<ID:0/004> Odin engine v(ID:3.1303)..
<ID:0/004> File analysis..
<ID:0/004> Total Binary size: 3975 M
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Set PIT file..
<ID:0/004> DO NOT TURN OFF TARGET!!
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> NAND Write Start!!
<ID:0/004> SingleDownload.
<ID:0/004> boot.img
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

I hope that someone could help me!

Hi there

Have you installed the correct drivers, original USB-cable, correct firmware, latest Odin ?

[drude12]

I'm using the original USB-cable. I tried with Odin versions 3.12.7, 3.13.1, 3.14.4

I downloaded the firmware on the following link : [ Login above or register to see download links. ]

<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4325 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Could be a problem with storage space on the phone? or FRP Lock?

[juande dios]

thank you

[henklbr]

I'm using the original USB-cable. I tried with Odin versions 3.12.7, 3.13.1, 3.14.4

I downloaded the firmware on the following link : [ Login above or register to see download links. ]

<ID:0/005> Added!!
<ID:0/005> Odin engine v(ID:3.1401)..
<ID:0/005> File analysis..
<ID:0/005> Total Binary size: 4325 M
<ID:0/005> SetupConnection..
<ID:0/005> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)

Could be a problem with storage space on the phone? or FRP Lock?

Does you phone have a FRP-lock (Factory Reset Protection)?

[drude12]

In the download mode I have "FRP LOCK : ON"

[henklbr]

In the download mode I have "FRP LOCK : ON"

Are you sure you've the correct firmware for your device? (Country / CSC)?

[drude12]

How could I check?
I'm living in Switzerland and my carrier is Swisscom. It took the GALAXY S7 EDGE SM-G935F SWC SWITZERLAND (SWISSCOM) G935FXXU8ETI2 FIRMWARE

[henklbr]

How could I check?
I'm living in Switzerland and my carrier is Swisscom. It took the GALAXY S7 EDGE SM-G935F SWC SWITZERLAND (SWISSCOM) G935FXXU8ETI2 FIRMWARE

OK, but it could be that firmware was not on your device when you bought it...

Which files did you flash? AP BL CP & HOME_CSC or AP BL CP & CSC ?

[drude12]

OK, but it could be that firmware was not on your device when you bought it...

Which files did you flash? AP BL CP & HOME_CSC or AP BL CP & CSC ?

Yes sure I took the latest version of 2020 and the phone is already 4 years old. I tried with AP BL CP & HOME_CSC and AP BL CP & CSC. I tried also with the Pit file