I want the new UI 2.5 update for my phone but since I'm using tmobile on an at&t unlocked model, I'm not receiving any updates. I tried to update through here but have not seen any versions that match my baseband number. Do I have to pick the one that matches my baseband number or can it just be whatever?
Last edited by nbyte4055; 14-10-2020 at 03:12.
Hi there, welcome to SamMobileOriginally Posted by nbyte4055 [ Login above or register to see download links. ]
Could you go to Software Info on your device, screenshot it from top to bottom and post it here?
Here are the sceenshots
1. Download SmartSwitch for PC (NOT to be used, just for the correct drivers): [ Login above or register to see download links. ]
2. Download Odin 3.14.x: [ Login above or register to see download links. ]
3. Download latest firmware for Multi-CSC OYN: [ Login above or register to see download links. ]
How to flash firmware to your phone:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download [ Login above or register to see download links. ]
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your S10+
6. Reboot Phone in Download Mode: [ Login above or register to see download links. ]
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
Note: use USB-A -> USB-C cable
Use SamMobile only if you are 100% sure about the risks involved in flashing your device. SamMobile is not responsible for any damage caused by using the files on this website.
Did you mean to put S10+? That's what I have, not a Note 10.1. Download SmartSwitch for PC (NOT to be used, just for the correct drivers): [ Login above or register to see download links. ]
2. Download Odin 3.14.x: [ Login above or register to see download links. ]
3. Download latest firmware for Multi-CSC OYN: [ Login above or register to see download links. ]
How to flash firmware to your phone:
1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
2. Download [ Login above or register to see download links. ]
3. Extract Odin ZIP file (i.e. to folder c:\Odin)
4. Open Odin v3.14.4
5. Power OFF your Note10+
6. Reboot Phone in Download Mode (1st plug-in USB-cable to your Note10+!!!), push Volume Up + Volume Down buttons, while pushing them plug-in USB-cable to PC
7. Wait until you get a blue sign in Odin
8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
9. Make sure re-partition is NOT ticked
10. Click the start button, sit back and wait few minutes
Note: use USB-A -> USB-C cable
Use SamMobile only if you are 100% sure about the risks involved in flashing your device. SamMobile is not responsible for any damage caused by using the files on this website.
You are so right: sorry...
I corrected my previous post...
Sorry to bother you again but I accidentally used [ Login above or register to see download links. ] instead of the link you just gave me for this other phone. The odin flash seems to have worked just fine tho. I just wanted to check with you to see if there would be any issues. Thanks
OK
The firmware from my link is newer...
Posting Permissions
Reply With Quote