Results 1 to 6 of 6

Thread: Which Android 10 firmware for G960U XAA?

  1. #1
    Junior Member
    Join Date
    May 2020
    Posts
    3

    Which Android 10 firmware for G960U XAA?

    Hi everyone,
    Sorry if this has been answered elsewhere, but I couldn't find a definitive answer.
    I'm in Australia and have a G960U (currently on Android 9) with a CSC of XAA and am struggling to determine which firmware to flash if indeed one exists.
    If it helps, my "Service Provider' states:
    SAOMC_SM_G960U-OYN-XAA_PP_0003
    555a414b4d563398
    XAA/XAA/ATT

    Thanks for any suggestions...

  2. #2
    Administrator
    Join Date
    Jul 2012
    Posts
    7,435
    Quote Originally Posted by dazedandconfused [ Login above or register to see download links. ]
    Hi everyone,
    Sorry if this has been answered elsewhere, but I couldn't find a definitive answer.
    I'm in Australia and have a G960U (currently on Android 9) with a CSC of XAA and am struggling to determine which firmware to flash if indeed one exists.
    If it helps, my "Service Provider' states:
    SAOMC_SM_G960U-OYN-XAA_PP_0003
    555a414b4d563398
    XAA/XAA/ATT

    Thanks for any suggestions...
    1. Download SmartSwitch for PC (NOT to be used, just for the drivers): [ Login above or register to see download links. ]
    2. Download Odin 3.14.x: [ Login above or register to see download links. ]
    3. Download latest firmware Multi-CSC OYN S9+: [ Login above or register to see download links. ]

    Flash AP BL CP & HOME_CSC_OYN (other files NOT to be used) with Odin 3.14.x -> your data will stay intact...

    How to flash firmware to your phone:



    1. Extract (un-rar) the firmware file (i.e. to folder c:\Odin) ***
    2. Download [ Login above or register to see download links. ]
    3. Extract Odin ZIP file (i.e. to folder c:\Odin)
    4. Open Odin v3.14.1
    5. Power OFF your S9
    6. Reboot Phone in Download Mode: Hold down Vol-UP & Power; scroll in Recovery to "Boot to Bootloader". Connect your S+ to your PC
    7. Wait until you get a blue sign in Odin
    8. Add the firmware files to their designated slots (AP in AP, BL in BL, CP in CP, HOME_CSC in CSC). USERDATA stays EMPTY!
    9. Make sure re-partition is NOT ticked
    10. Click the start button, sit back and wait few minutes

    Use SamMobile only if you are 100% sure about the risks involved in flashing your device. SamMobile is not responsible for any damage caused by using the files on this website.

  3. #3
    Junior Member
    Join Date
    May 2020
    Posts
    3
    Thanks for your response, Henklbr.
    I believe the "CP" is the modem software. I take it this will work in Australia and is not USA only? Apologies for dumb questions, but I'm a little new to all these files and how they may or may not work across countries. Will it mess up other stuff such as GPay and the like?
    I'll get the software downloaded and ready to rock.

    Thanks again.
    Last edited by dazedandconfused; 05-05-2020 at 10:09.

  4. #4
    Administrator
    Join Date
    Jul 2012
    Posts
    7,435
    Quote Originally Posted by dazedandconfused [ Login above or register to see download links. ]
    Thanks for your response, Henklbr.
    I believe the "CP" is the modem software. I take it this will work in Australia and is not USA only? Apologies for dumb questions, but I'm a little new to all these files and how they may or may not work across countries. Will it mess up other stuff such as GPay and the like?
    I'll get the software downloaded and ready to rock.

    Thanks again.
    Well: you've a US-device; when following my post, settings will stay the same on your device (nothing will be deleted)...

  5. #5
    Junior Member
    Join Date
    May 2020
    Posts
    3
    Thanks again, henklbr.
    Looks like the update has gone through smooth as silk.
    For future reference (although I doubt the S9 will get Android 11) is the USA (USC) package the one I should always look for?

    Thanks again.

  6. #6
    Administrator
    Join Date
    Jul 2012
    Posts
    7,435
    Quote Originally Posted by dazedandconfused [ Login above or register to see download links. ]
    Thanks again, henklbr.
    Looks like the update has gone through smooth as silk.
    For future reference (although I doubt the S9 will get Android 11) is the USA (USC) package the one I should always look for?

    Thanks again.
    Yeps

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •