Results 1 to 5 of 5

Thread: Flashing stock rom failing NEED HELP PLEASE

  1. #1
    Junior Member
    Join Date
    Apr 2019
    Posts
    3

    Unhappy Flashing stock rom failing NEED HELP PLEASE

    I've bricked my samsung galaxy s7 edge exynos so now i've been trying to reinstall stock rom but i get Complete(Write) operation failed error.
    Here is the log of odin please someone help me.

    <ID:0/007> Odin engine v(ID:3.1301)..
    <ID:0/007> File analysis..
    <ID:0/007> Total Binary size: 3988 M
    <ID:0/007> SetupConnection..
    <ID:0/007> Initialzation..
    <ID:0/007> Set PIT file..
    <ID:0/007> DO NOT TURN OFF TARGET!!
    <ID:0/007> Get PIT for mapping..
    <ID:0/007> Firmware update start..
    <ID:0/007> NAND Write Start!!
    <ID:0/007> SingleDownload.
    <ID:0/007> sboot.bin
    <ID:0/007> param.bin
    <ID:0/007> cm.bin
    <ID:0/007> boot.img
    <ID:0/007> recovery.img
    <ID:0/007> system.img
    <ID:0/007>
    <ID:0/007> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)
    Last edited by Giekdbw; 14-04-2019 at 20:22.

  2. #2
    Administrator
    Join Date
    Jul 2012
    Posts
    8,126
    Hi there,

    How did you brick your device?

    Which files are you flashing, what's your devices country/CSC?

  3. #3
    Junior Member
    Join Date
    Apr 2019
    Posts
    3
    I had rooted my phone with magisk but the system was unstable with everything crashing and stuff so i read online how to unroot your phone and that's to flash stock rom. While flashing stock rom i got this exact same error and then stupid me took the cable out of it, i then got greeted with a blue screen saying "An error has occurred while updating the device software." and something about using emergency recovery. I tried the recovery thing but i read on xda that samsung pulled the plug on it so now im stuck with the write error every time i try to flash stock through odin. Now i've flashed twrp back on the phone. Then i've installed lineage os on the phone but i'm not satisfied with it. I'm not 100% sure on my csc but i live in the Netherlands. But when going to the about section in linage os it says my baseband version is G935FXXU4ESAE, which on googling tells me the region is Austria - ATO. I'm not sure if this is correct but i hope you know what's right.

    I've tried to flash G935FXXS4ESC1_G935FPHN4ERKF_PHN since i think the PHN is the unbranded version and i didn't have my phone from the other available providers in the list.
    After discovering the baseband version in linage os i also tried a ATO version to no succes either.

    Do you need anything else?
    My phone is exynos btw

    Edit: Isn't it possible for me to just flash a pie rom like this one? [ Login above or register to see download links. ]
    I'm sorry if i'm asking too much
    Last edited by Giekdbw; 15-04-2019 at 16:17. Reason: Added a question and info

  4. #4
    Junior Member
    Join Date
    Apr 2019
    Posts
    3
    [ Login above or register to see download links. ]

  5. #5
    Administrator
    Join Date
    Jul 2012
    Posts
    8,126
    Hi there,

    It's the best you ask support on the XDA-site, where you downloaded/installed LineOS ROM from

    This forum does not support ROOTed and/or CUSTOM ROM phones, sorry...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •