Results 1 to 10 of 10

Thread: Need help with updating BADA 1.0 ro 2.0

  1. #1
    Junior Member
    Join Date
    Mar 2014
    Posts
    6

    Exclamation Need help with updating BADA 1.0 ro 2.0

    Hi,

    I have been trying eveyrthing, but I just can not get BADA 2.0 installed in my Samsung GT-S8500
    I downloaded S8500XXLA1_S8500OXCLA2_FOP_modif.zip file which should have all the files for using the downloade V-5.67
    But when I use it I get an error :"Serial port open error i" which I read it shpould be something todo with the drivers.
    So I isntalled the S8500-Driver-V5_02_0_0 drivers. when I go to Administarodr of hardware it states it has a "Samsung Wave(GT-S8500)
    " conected. So I believe the drivers are good.

    So what is going on? What am I doing doeing wrong.
    I started KIES and then stopped it before using the Downloader, as stated in some posts.
    When I connect my mobile I get on screen a message:

    Versión actual de firmware : S8500XXJF8/S8500OXCJF3 (FOP)
    Versión más reciente de firmware : S8500XXLA1/S8500OXCLA2 (FOP)

    Which I am trying to do. but when I continue. The screens seems to hang. After 15 minutes waiting it still seems to hang. That screen is in front and there is no way to remove it until I disconnect the mobile.

    I want to install 2.0 so I can install ANdroidon it.

    Please, any help is welcome. I have been to may forums, but all the links are dead, so if you have some zip files I could use, please tell me where to find them.
    Or send them sending me your email using PM and I send you mine, so you can send them to me.

    I need help!!!!!

    thx.

  2. #2
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,789
    @Johny1900
    I'm sorry, but I have little knowledge of Bada so cannot help with your installation.
    Regarding firmware, if you can send the link with request to download to Sammobile to:
    [email protected]

    You will get assistance.

  3. #3
    Junior Member
    Join Date
    Mar 2014
    Posts
    6
    Hi,

    I did this for now and get a BIG problem I guess, well I hope not!!!!


    i I just did this:
    Started kies,
    closed kies
    started downloader 5.67
    Did port searxh (it sais port 9 READY)
    selected BOOT CHANGE and Full download
    clicked on boot and selected the bootfiles folder form the firmware of a link I got, it seems to be the spanish one. So I don´t get why I get an error.
    than I selected the rest of the fils and dropped them on downloader
    The clicked DOWNLOAD
    and after 4-5 seconds I got this in the right upper screen

    Boot Binary Download Start Ch[0]
    Serial port open error in download boot!
    Download Start Ch[0]
    Serial port open error in downloadex!


    And that is it.

    now I start the phone and I get a black screen and written in white "SAMSUNG WAVE GT-S8599" and nothing happens more.

    ANy idea what I can do?
    Why is it calling a serial port??

  4. #4
    Junior Member
    Join Date
    Mar 2014
    Posts
    6
    Hi eveyrbody,

    I don´t know what happened, but I tried again and saw the same message and was P*issed off as I thought the phone was now a nice paperholder, so I hit the download button a vouple of times and suddenly it started to download, uncompress and install eveyrthing.

    Now I have Bada 2.0!!!! SOmething that KIES couldnńt do, downloader 5.67 can!!!
    Now I have to find out how to install ANdroid in a kind of multiloader, so that I can choose between the two of them.
    I know it isn´t for this thread, but if you know, please tell me!!!!

    KR and thx for everybody

  5. #5
    Junior Member
    Join Date
    Jul 2014
    Posts
    1
    I had the same problem. Thanks to "johny1900" , I changed my multiloader from 5.62 to 5.67 and I completed the box "FOTA" unlike previous tries. So It worked!

  6. #6
    Junior Member
    Join Date
    Jul 2014
    Posts
    1
    the firmware downloads dont work they are corrupt apparently from here

  7. #7
    Senior Member
    Join Date
    Jan 2012
    Posts
    2,519
    hello mpoulton6
    please post the corrup download link and if i can i'll post you an alternative link (i have some bada1 and 2 original firmwares and sometimes i can remake a special bada2 firmware (OXA OXB OXC OXD OXE OXF OXG ODD ) with only your country CSC
    best regards
    Last edited by yakapa40; 28-07-2014 at 06:44.

  8. #8
    Junior Member
    Join Date
    Dec 2013
    Posts
    14
    Hi I have in my wave bada1.2 but just wanted a link of bada1.0 xxjf8 whoever has it,I just wanted that,tanks

  9. #9
    Senior Member
    Join Date
    Jan 2012
    Posts
    2,519
    hello
    [ Login above or register to see download links. ]

    [ Login above or register to see download links. ]

    regards

  10. #10
    Junior Member
    Join Date
    May 2014
    Posts
    1
    Please need a bada 1.0 Australia Vodafone if possible.
    email to [ Login above or register to see download links. ]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •