Results 1 to 9 of 9

Thread: G928f can't update firmware

  1. #1
    Premium Member
    Join Date
    Oct 2016
    Posts
    20

    G928f can't update firmware

    HI,
    G928f tried to update firmware with z3x and chimera tool and then odin as well with all software it gets stuck at flashing system.img. phone goes off at this point and then it says flashing failed. is it just battery issue as i have 3 s6 edge+ with me with the same problem. thanks

  2. #2
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,789
    Sounds like the wrong firmware image is being used.
    If you can, provide this information:

    [ Login above or register to see download links. ]

  3. #3
    Premium Member
    Join Date
    Oct 2016
    Posts
    20
    hi thanks for your reply but phone is not turning on and stuck in some error so how can i get this info thanks

  4. #4
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,789
    Quote Originally Posted by prounlockuk [ Login above or register to see download links. ]
    hi thanks for your reply but phone is not turning on and stuck in some error so how can i get this info thanks
    Are you sure the phones are G928F?
    What model number is given in Download Mode?

  5. #5
    Premium Member
    Join Date
    Oct 2016
    Posts
    20
    i have tried with samsung switch with the serial number from the back of the phone and it did the same at 50 % phone siwtched off and came back with n error has occurred while updating the device software. please help as this phone was working when it came to me i tried downgraded firmware and it got stuck at this thanks

  6. #6
    Premium Member
    Join Date
    Oct 2016
    Posts
    20
    hi yes it says
    Product name: SM-g928f
    CA_ Type: Ca_3
    current binary: samsung official
    system status: custom
    frp lock: off

  7. #7
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,789
    Quote Originally Posted by prounlockuk [ Login above or register to see download links. ]
    i have tried with samsung switch with the serial number from the back of the phone and it did the same at 50 % phone siwtched off and came back with n error has occurred while updating the device software. please help as this phone was working when it came to me i tried downgraded firmware and it got stuck at this thanks
    Do you remember the firmware that SmartSwitch was trying to install?
    It may be better to install it with the PIT file using Odin.

    PIT files here:
    [ Login above or register to see download links. ]

  8. #8
    Junior Member
    Join Date
    Dec 2013
    Posts
    1
    How do we enable VOLTE for EDGE plus - G9287 Model.

  9. #9
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,789
    Quote Originally Posted by gkrananth [ Login above or register to see download links. ]
    How do we enable VOLTE for EDGE plus - G9287 Model.
    Does your HongKong/Taiwan network offer a VoLTE service?
    [ Login above or register to see download links. ]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •