Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Help N910W8 6.0.1

  1. #1
    Junior Member
    Join Date
    Nov 2016
    Posts
    8

    Help N910W8 6.0.1

    N910W8VLU1DPE2 fails to flash, an error

    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/003> Added!!
    <ID:0/003> Odin engine v(ID:3.1205)..
    <ID:0/003> File analysis..
    <ID:0/003> SetupConnection..
    <ID:0/003> Initialzation..
    <ID:0/003> Get PIT for mapping..
    <ID:0/003> Firmware update start..
    <ID:0/003> SingleDownload.
    <ID:0/003> aboot.mbn
    <ID:0/003> sbl1.mbn
    <ID:0/003> rpm.mbn
    <ID:0/003> tz.mbn
    <ID:0/003> sdi.mbn
    <ID:0/003> NON-HLOS.bin
    <ID:0/003> boot.img
    <ID:0/003> FAIL! (Write)
    <ID:0/003>
    <ID:0/003> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

  2. #2
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,784
    Your firmware is not writing to your phone.
    This can be a process error.
    First of all check:
    1. You are using an original quality USB cable and not a thinner charging USB cable. They cannot transmit the data.
    2. You are connecting directly to the PC USB port and not through a usb hub.
    3. Try another PC USB port.
    4. Try another Odin version.
    I would suggest Odin 3.09
    [ Login above or register to see download links. ]

  3. #3
    Junior Member
    Join Date
    Nov 2016
    Posts
    8
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> N910W8VLU1DPE2_N910W8OYA1DPE2_N910W8VLU1DPE2_HOME. tar.md5 is valid.
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/010> Added!!
    <ID:0/010> Odin v.3 engine (ID:10)..
    <ID:0/010> File analysis..
    <ID:0/010> SetupConnection..
    <ID:0/010> Initialzation..
    <ID:0/010> Get PIT for mapping..
    <ID:0/010>
    <ID:0/010> There is no PIT partition.
    <OSM> All threads completed. (succeed 0 / failed 1)

    I tried, your recommendations
    1. USB cable original samsung
    2. another PC USB port
    3. Odin 3.09
    It jumped another error

  4. #4
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,784
    See if flashing the firmware with its pit file will help.
    SM-N910W8 OYA multi CSC ( BMC BWA ESK FMC GLW KDO MTA RWC TLS VMC VTR )
    TRLTE_CAN_OPEN.pit
    [ Login above or register to see download links. ]

    Odin settings when using the pit file and firmware together are
    Re-partition
    F.Reset Time
    Auto Reboot

  5. #5
    Junior Member
    Join Date
    Nov 2016
    Posts
    8
    does not work
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> N910W8VLU1DPE2_N910W8OYA1DPE2_N910W8VLU1DPE2_HOME. tar.md5 is valid.
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/010> Added!!
    <ID:0/010> Odin v.3 engine (ID:10)..
    <ID:0/010> File analysis..
    <ID:0/010> SetupConnection..
    <ID:0/010> Initialzation..
    <ID:0/010> Set PIT file..
    <ID:0/010> DO NOT TURN OFF TARGET!!
    <ID:0/010> Get PIT for mapping..
    <ID:0/010> Firmware update start..
    <ID:0/010> SingleDownload.
    <ID:0/010> aboot.mbn
    <ID:0/010> NAND Write Start!!
    <ID:0/010> sbl1.mbn
    <ID:0/010> rpm.mbn
    <ID:0/010> tz.mbn
    <ID:0/010> sdi.mbn
    <ID:0/010> NON-HLOS.bin
    <ID:0/010> boot.img
    <ID:0/010> recovery.img
    <ID:0/010> system.img.ext4
    <ID:0/010> FAIL! (Write)
    <ID:0/010>
    <ID:0/010> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

  6. #6
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,784
    If you used the PIT file and selected Re-partition in Odin, then it look like you are having problems with your phone memory.
    Were there any issues before you tried to install this firmware?
    Can you return to your original firmware version?

  7. #7
    Junior Member
    Join Date
    Nov 2016
    Posts
    8
    I bought second-hand, firmware do not know what was
    the seller said that the firmware 6.0.1
    on how I understood not original, I decided to flash the stock
    may try to flash 5.1.1 ?

    PS: can not start recovery mode ,оnly flashing mode
    PSS: I read online that should help "firmware 4 files" , where this take?
    Last edited by denvassa; 03-11-2016 at 06:51.

  8. #8
    Junior Member
    Join Date
    Nov 2016
    Posts
    8
    Well then Me need to change the motherboard ?

  9. #9
    Junior Member
    Join Date
    Mar 2016
    Posts
    1
    i have the same problem. People say that samsung with some of the updates (not sure which version) locked the bootloader and you cannot flash earlier than the locked version. ie. you may be able to flash 6.0.1/5.1.1 but not 5.0.1 or 4.4.4.

    4.4.4 Kitkat was the last good android in many many ways (photo quality, no oversharpen or overnoise cancelling, speed, battery, notifications, UI, default programmes, it is an endless list) but i think we are screwed unless a great hacker finds a way. I pay $$ for a way, please out there!!!

  10. #10
    Junior Member
    Join Date
    Nov 2016
    Posts
    8
    I have another problem,I do not flash the firmware

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •