Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: Newbie: Backflash Stock, Odin FAIL ext4; wich PID, wich stock ?

  1. #1
    Junior Member
    Join Date
    Dec 2014
    Posts
    6

    Question Newbie: Backflash Stock, Odin FAIL ext4; wich PID, wich stock ?

    Hi,

    after running CM13 a long time, i would flash stock on my phone.

    1. I flashed a CyanogenMod Backup. But when I start my phone, WLAN doesnīt work, I canīt switch it on ???

    2. I tried to flash a stock from sammobile (for GT-I9195)
    Odin faild at last step with an ext4 error (seams to be hidden partition).
    3. I tried to flash with PID from Internet, same error

    When I search fpr GT-I9195 on Sammobile I get a lot of stocks: with some PDA CSC values.
    Can I take every stock??

    On forum there serveral PID files with some letters:
    GT-I9190 SER, GT-I9192 OJV multi CSC ( ACR AFG AFR BTC ECT EGY FWD KEN KSA LYS MID MRT MWD PAK THR TMC TUN WTL XFE XSG ), and so on.
    Wich is the right file ??

    Thanks for help

    Greets

    Byte

  2. #2
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,789
    You need the firmware PIT file to install the firmware.
    PIT file for OJV firmware is not available, so can you post your Sammobile firmware link to our technical moderator, yakapa40.

    PM here:
    [ Login above or register to see download links. ]
    Last edited by greenman; 21-06-2016 at 10:13.

  3. #3
    Junior Member
    Join Date
    Dec 2014
    Posts
    6
    Hi,

    I donīt know wich stock-version I shoud take!
    So OJV was only an example, not my file!

    So can you tell mich wich stock can I take (does it matter?)
    And then wich PID file shoud I take??

    Thanks for info

    Greets

    Byte

  4. #4
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,789
    Apply the same procedure to the firmware that you want.
    Usually this is the firmware for the country where you live, or the language you want on boot.

  5. #5
    Junior Member
    Join Date
    Dec 2014
    Posts
    6
    Hi,

    sorry for my newbie questions:

    When I Search for GT-I9195 LTE Germany DTB I got a huge list:

    Date Country/Carrier Version PDA CSC Kies
    2015-07-15 Germany 4.4.2 I9195XXUCOE4 I9195OXACOE1 YES
    2015-07-15 Germany 4.4.2 I9195XXUCOA2 I9195OXACOA2 NO
    2015-03-06 Germany 4.4.2 I9195XXUCNK4 I9195QXZCOA1 NO
    2015-01-19 Germany 4.4.2 I9195XXUCNK4 I9195YBTCNL3 NO
    2014-12-01Germany 4.2.2 I9195XXUBML4 I9195YBTBNA2 NO
    2015-01-26 Germany 4.4.2 I9195XXUCNJ4 I9195OXACNJ4 NO
    2014-11-07 Germany 4.4.2 I9195XXUCNH5 I9195OXACNH5 NO
    2014-09-16 Germany 4.4.2 I9195XXUCNE6 I9195OXACNE6 NO
    2015-08-18 Germany 4.2.2 I9195XXUBML4 I9195OXABML4 NO
    2015-08-18 Germany 4.2.2 I9195XXUBML4 I9195QBTBML4 NO
    2015-08-18 Germany 4.2.2 I9195XXUBML1 I9195OXABML1 NO
    2015-08-18 Germany 4.2.2 I9195XXUBML1 I9195QBTBML1NO
    2015-08-10 Germany 4.2.2 I9195XXUBMJ7 I9195OXABMJ7 NO
    2015-08-10 Germany 4.2.2 I9195XXUAMH3 I9195OXAAMH3 NO
    2015-08-10 Germany 4.2.2 I9195XXUAMG8 I9195OXAAMG8 NO
    2015-08-10 Germany 4.2.2 I9195XXUAMG4 I9195OXAAMG4 NO
    2015-08-10 Germany 4.2.2 I9195XXUAMF5 I9195OXAAMF5

    Can I take one of them?
    Does it matter wich one?

    And on forum site there are a huge list of PID:

    GT-I9190 SER

    GT-I9192 OJV multi CSC ( ACR AFG AFR BTC ECT EGY FWD KEN KSA LYS MID MRT MWD PAK THR TMC TUN WTL XFE XSG )

    GT-I9192 SER
    GT-I9192 OXE multi CSC ( CAC CAU SEK SKZ )
    GT-I9192 UUB multi CSC ( BVO CHO COO TPA TTT )
    GT-I9192 ZTA

    GT-I9195 EPL
    CSB_signed_SERRANOLTE_ONEPIT_OPEN_GPG_130523.pit

    GT-I9195 EVR
    GT-I9195 FTM IDE ORO
    GT-I9195 VFR multi CSC ( CNX CYV SIM TCL VDC VDH VDI VGR VIP VOD XFV )

    GT-I9195 OXX multi CSC ( BGL COA CYO ERO ETL GBL MET MSR ORX PHE ROM SEB SEE SIO SMO TEB TPH TRA TSR TWO VIM XEF XEH XSK )

    GT-I9195 CRM ( TFG )

    GT-I9195L TFG

    GT-I9195L UUB multi CSC ( BVO COO TTT )
    GT-I9195L UWA multi CSC ( CDR COM CTP CTU PCT PET )

    GT-I9195L UWM multi CSC ( CGU COL ETE TGP )

    GT-I9195T XSA

    SGH-I257M OYA multi CSC ( BMC BWA CHR FMC KDO MTA RWC SPC TLS VMC ) pit

    SM-S890L TFN

    SPH-L520 SPR


    Thanks

    greets

    Byte

  6. #6
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,789
    You are making hard work of this.

    Where do you live?
    What is your preferred language?

  7. #7
    Junior Member
    Join Date
    Dec 2014
    Posts
    6
    Hi,
    sorry! But I want to understand.

    So I need same CSC for firmware AND PIT ?

    So I live in germany. I woult flash DBT so no branding is there.
    But I dindīt find dbt PIT.

    So I want to flash (E-Plus - EPL)

    STOCK:
    2014-11-21 Germany (E-Plus) 4.4.2 I9195XXUCNK1 I9195EPLCNI1

    PIT:
    GT-I9195 EPL
    CSB_signed_SERRANOLTE_ONEPIT_OPEN_GPG_130523.pit
    [ Login above or register to see download links. ]


    Is this right? Did I understand it ??



    Thanks

    greets

    Byte

  8. #8
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,789
    Exactly right.
    You match the firmware CSC code to the PIT file CSC code.

    Now put both files in Odin.
    Odin settings :
    Re-partition + Auto Reboot + F.Reset Time

  9. #9
    Junior Member
    Join Date
    Dec 2014
    Posts
    6
    So, sorry,

    it doesnīt work!
    Here is the log

    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> I9195XXUCNK1_I9195EPLCNI1_I9195XXUCNK1_HOME.tar.md 5 is valid.
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/005> Added!!
    <ID:0/005> Odin v.3 engine (ID:5)..
    <ID:0/005> File analysis..
    <ID:0/005> SetupConnection..
    <ID:0/005> Initialzation..
    <ID:0/005> Set PIT file..
    <ID:0/005> DO NOT TURN OFF TARGET!!
    <ID:0/005> Get PIT for mapping..
    <ID:0/005> Firmware update start..
    <ID:0/005> SingleDownload.
    <ID:0/005> sbl1.mbn
    <ID:0/005> NAND Write Start!!
    <ID:0/005> sbl2.mbn
    <ID:0/005> sbl3.mbn
    <ID:0/005> aboot.mbn
    <ID:0/005> rpm.mbn
    <ID:0/005> tz.mbn
    <ID:0/005> boot.img
    <ID:0/005> recovery.img
    <ID:0/005> system.img.ext4
    <ID:0/005> NON-HLOS.bin
    <ID:0/005> cache.img.ext4
    <ID:0/005> hidden.img.ext4
    <ID:0/005> FAIL! (Ext4)
    <ID:0/005>
    <ID:0/005> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)


    What can I do?

    Greets

    Byte

  10. #10
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,789
    Ok, It looks like you either have used the wrong PIT file or you didn't instruct Odin to re-partition.
    Set Odin to:
    Re-partition + Auto reboot +F.reset Time

    If still not working try flashing the PIT and then the firmware.
    Put the PIT in Odin and setting is:
    Re-Partition + F.Reset Time

    Now put firmware into Odin:
    Odin Settings are
    F.Reset Time + Auto Reboot.
    Last edited by greenman; 24-06-2016 at 17:02.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •