Can it b modified i hv already tried tat
Sent from my SM-G935F using Tapatalk
You can keep asking questions but my post in #27 remains as my final answer.
Ok dear thanks alot for your help
Sent from my SM-G9350 using Tapatalk
Hi, begin from PBH6 csc AUT, if from recovery reboot i see e: failed to mount /data (invalid argoument) if before male two wipe first reboot time all' is right from second fail come again.
So i flash again with pit and repartition flag on no any change. So i flash new and use PBHJ and csc DBT with pit and repartition again. Flash end wihout error but i have always failed to mount data device work fine and i Don't know if "failed" come from recovery bug or must go to assistance!
Can you help me?
Best regards!
Inviato dal mio Redmi 3 utilizzando Tapatalk
Originally Posted by greenman [ Login above or register to see download links. ]
Original csc Don't show but is AUT
Failed with csc AUT
Failed with csc DBT
As you see Don't change anything with both firmware and i Don't know when error begin should bč also before flash PBH6 AUT because i found another user that tell me also your s7 930 and s7 935 show same Red line i think should be a recovery or other bug do you think about it ?
Inviato dal mio Redmi 3 utilizzando Tapatalk
Last edited by sammax; 11-09-2016 at 16:32.
Do you have an external sd card installed?
If so remove it before rebooting.
If you do not have an external sd card, then see if SmartSwitch will re-install your firmware:
Use method in post #3
[ Login above or register to see download links. ]
Hi i have an sd Samsung evo64 but if remove and reboot nothing change.
I have Just try smartswitch initialization and installare firmware writing model and serial numero the processo go to the end correctly ma problem remain.
Can bč only a bug ? I Don't found any problem smartphone work fine ! This is stranger !
Upgrade i use again smartswitch and
Now reinstall PBH6 AUT on PBHJ DBT After initialization
Flash ok but all now is PBH6 AUT but situation is the same
Inviato dal mio Redmi 3 utilizzando Tapatalk
Last edited by sammax; 11-09-2016 at 21:41.
Upgrade i found others four user that have this Red line i believe that this is a bug not is possibile that all Samsung device are fault
Inviato dal mio Redmi 3 utilizzando Tapatalk
Last edited by sammax; 12-09-2016 at 00:44.
Hello firend, where you successfull? I bought an At&t S7 edge, unlocked but I want to change the firmware from SM-G935A to SM-G935F id this possible? Or any firmware without AT&T limitations.. appreciate comments..
Posting Permissions
Reply With Quote
