Page 13 of 22 FirstFirst ... 31112131415 ... LastLast
Results 121 to 130 of 220

Thread: Please help! Samsung Note 4 stuck at ODIN flash read failure / mmc read fail

  1. #121
    Junior Member
    Join Date
    Dec 2016
    Posts
    1
    another possibilities is to consider failure of the cpu.
    which can be replaced by itself instead of the whole mother board.

  2. #122
    Junior Member
    Join Date
    Jul 2016
    Posts
    3
    OK I have been suffering from this pit issue with odin failure for 6 months. Today I just randomly tried it out and it worked for me. Heres what i did.
    1. Downloaded the pit binary for my model and Twrp recovery (google it).
    2. Download Odin 3.09
    3. Put your phone in download mode (Volume down + power+ home) connecting it to the PC. Make sure the messages you get on your phone screen is what you normally get.
    4. Add the pit file in pit. Add the twrp (.tar file) file in AP and CP. Have the auto reboot checked only.
    5. Let the phone restart till you see the odin say Pass.
    6. Take out battery, disconnect usb and put the battery back and turn on phone using (Volume up + power + home)
    7. You will be in the twrp recovery. You can add any custom rom in your memory card and install the rom through twrp recovery.
    8. You will need to flash the bootloader (BL) and modem (CP) after you've installed a custom rom. The link for the required BL and CP should be in the custom rom link

  3. #123
    Junior Member
    Join Date
    Jan 2014
    Posts
    1
    i have the same problem
    eMMC write failed : Aboot
    N910f

    Any help

  4. #124
    Junior Member
    Join Date
    Oct 2013
    Posts
    4
    Greenman,
    I am having an MMC error: mmc_read fail error

    Here is what is on the phone currently.:

    Could not do normal boot
    ddi : mmc_read failed
    ODIN MODE (HIGH SPEED)
    Product Name: SM-N910A
    Current binary: Samsung Offical
    SYSTEM STATUS: Custom
    REACTIVATION LOCK: OFF
    KNOX WARRANTY VOID: 0x0
    QUALCOMM SECUREBOOT: ENABLE (CSB)
    AP SWREV: S1, T2, R1, A2, P1
    SECURE DOWNLOAD: ENABLED
    UDC START
    MMC: mmc_read fail
    MMC: mmc_read fail

    Smartswitch isn't working. I am using Odin 3.09 and it reconizes on the proper com port. So i know the cable is ok. Any Ideas would be appericated. I thank you in advance for your help.

  5. #125
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,791
    Looks like a hardware failure.
    Take it for an emmc/ motherboard repair.

  6. #126
    Junior Member
    Join Date
    Oct 2013
    Posts
    4
    Is there anything else I can try first? I can boot into recovery, and it says "Installing system update" with the little green man with the spinner in his belly and his antenna twitching. So it doesn't appear that it is a hardware issue? When it gets done, it goes to reboot system now. It says on the bottom of the screen that it applied the CSC-code : ATT Successfully applied multi-CSC. I can also get into the logs if that will help.

    I just did a full factory reset and the phone is on the Samsung Galaxy note 4 screen. It has been in this state for the past 5 minutes or so. Thanks in advance for your response.
    Last edited by jpsllc; 23-12-2016 at 16:26. Reason: More information to add.

  7. #127
    Junior Member
    Join Date
    Jul 2012
    Posts
    10
    Quote Originally Posted by greenman [ Login above or register to see download links. ]
    Can you have a last attempt.
    Looking at this again, I'm wondering if your bootloader is damaged.
    Try using one of these repair firmwares.
    They have 4 files including a bootloader.
    ---------------------------------------------------------
    Samsung N910F Galaxy Note 4 LTE-A Repair Firmwares:

    N910FXXU1ANK4 / OXA1ANK4 v4.4.4: [ Login above or register to see download links. ]

    N910FXXU1BOC3 / VFG1BOC2 v5.0.1: [ Login above or register to see download links. ]

    -----------------------------------------------------------
    Hi greenman , can you please give me a link for n910t a repaier firmwares so i can flash via odin , i'm having the same problem with " ddi error "
    i did already flashed with pit and with 6.0.1 N910TUVS2EPK2_N910TTMB2EPK2_TMB ,and having this error message .thank you

  8. #128
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,791
    hac12,
    Sorry, I do not follow.
    A ddi error is a problem with the database.
    Did the firmware not download and unzip correctly?

    I do not have a repair firmware for the N910T.

  9. #129
    Junior Member
    Join Date
    Jul 2012
    Posts
    10
    Quote Originally Posted by greenman [ Login above or register to see download links. ]
    hac12,
    Sorry, I do not follow.
    A ddi error is a problem with the database.
    Did the firmware not download and unzip correctly?

    I do not have a repair firmware for the N910T.
    Hi, it downloaded correctly ,but still have the ddi message error, and it also have trouble to boot up , i thought you have the repair frimware to fix those problem. do you know where can i get it ?

  10. #130
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,791
    Flashing the PIT file and firmware file together would be my first alternative.
    Firmware here:
    [ Login above or register to see download links. ]

    PIT file here:

    SM-N910T TMB
    SM-N910T1 TMB
    TRLTE_USA_TMO.pit
    [ Login above or register to see download links. ]

    set Odin to:
    Re-partition
    F.Reset Time
    Auto Reboot

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •