Results 1 to 9 of 9

Thread: N910F - Cannot conect to network operator

  1. #1
    Junior Member
    Join Date
    Dec 2012
    Posts
    5

    N910F - Cannot conect to network operator

    I bought main board from the AliExpress to replace my faulty board. I got the board with 4.4.4. and via ota oprgraded to 5.5.1 and then via odin to 6.0.1 Israeli CEL ROM. The signal shows 3-4 bars, but I can not conect to the local network operator Hot Mobile. I tried to do so via manual selection without any success. Could you advice what is the problem.

    Click image for larger version. 

Name:	Screenshot_2017-01-22-22-29-06[1].png 
Views:	18 
Size:	187.1 KB 
ID:	12327Click image for larger version. 

Name:	Screenshot_2017-01-22-22-29-14[1].png 
Views:	13 
Size:	258.7 KB 
ID:	12328Click image for larger version. 

Name:	Screenshot_2017-01-22-22-29-19[1].png 
Views:	11 
Size:	303.6 KB 
ID:	12329Click image for larger version. 

Name:	Screenshot_2017-01-22-22-29-23[1].png 
Views:	12 
Size:	282.2 KB 
ID:	12330Click image for larger version. 

Name:	Screenshot_2017-01-22-22-29-38[1].png 
Views:	12 
Size:	215.6 KB 
ID:	12331Click image for larger version. 

Name:	Screenshot_2017-01-22-22-30-07[1].png 
Views:	9 
Size:	201.1 KB 
ID:	12332
    Last edited by jr26690; 22-01-2017 at 21:35.

  2. #2
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,716
    The CellCom 6.0.1 firmware looks suspicious to me.
    The latest firmware normally appears at the top of the list, while in CellCom it is at the bottom.
    This may indicate an issue.

    I would install the Israel ILO firmware.
    ILO 6.0.1 here:
    https://www.sammobile.com/firmwares/...FOJK1DPG2_ILO/

  3. #3
    Junior Member
    Join Date
    Dec 2012
    Posts
    5
    I have started with the Israel ILO firmware, then tried the Orange ROM nad ended with the CEL rom. The same result with all. I have another Note 4 910F and it connects with Hot Moble or Orange or Plephone immediatelly.

    I have tried with all 6.0.1 Roms with the same problem, then downgraded to 4.4.4 hoping that it will fix the proble, but got the same results.
    Last edited by jr26690; 22-01-2017 at 21:51.

  4. #4
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,716
    Quote Originally Posted by jr26690 View Post
    I have started with the Israel ILO firmware, then tried the Orange ROM nad ended with the CEL rom. The same result with all. I have another Note 4 910F and it connects with Hot Moble or Orange or Plephone immediatelly.

    I have tried with all 6.0.1 Roms with the same problem, then downgraded to 4.4.4 hoping that it will fix the proble, but got the same results.
    Sounds like a hardware fault.
    The csc is not showing.
    What about the imei? Is that correct?
    dial *#06# and check against original documents.

  5. #5
    Junior Member
    Join Date
    Dec 2012
    Posts
    5
    It is good.Click image for larger version. 

Name:	Screenshot_2017-01-23-08-51-31[1].png 
Views:	9 
Size:	34.1 KB 
ID:	12336

  6. #6
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,716
    Quote Originally Posted by jr26690 View Post
    It is good.
    The IMEI check shows that your phone is an N9100

    Click image for larger version. 

Name:	Capture.PNG 
Views:	10 
Size:	13.5 KB 
ID:	12337

    Firmware here:
    https://www.sammobile.com/firmwares/database/SM-N9100/

    NOTE:
    Use Hong Kong firmware if you have the Play Store

  7. #7
    Junior Member
    Join Date
    Dec 2012
    Posts
    5
    Thanks for your support greenman. I am waiting for the firmware to finish download. After installing the firmware would I be able to connect to local network operators. The board that I bought from AliExpress was/is N9100F as it marked on the board..

  8. #8
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,716
    Quote Originally Posted by jr26690 View Post
    Thanks for your support greenman. I am waiting for the firmware to finish download. After installing the firmware would I be able to connect to local network operators. The board that I bought from AliExpress was/is N9100F as it marked on the board..
    I think you have to wait and see.

  9. #9
    Junior Member
    Join Date
    Dec 2012
    Posts
    5
    Thanks so much. I will report the outcome as I finished installing and trying. The seller indicated that the board is unlocked and open to all network operators.

    Downloaded the firmware, but when tried to flash with odin 3.09 got rpm.mbn Fail (auth) .

    What I should do?

    greenman please response, don't know what todo. Thanks in advance.
    Last edited by jr26690; 24-01-2017 at 20:07.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •