Page 2 of 11 FirstFirst 1234 ... LastLast
Results 11 to 20 of 107

Thread: PLEASE HELP E: failed to mount /cache (No such file or directory)

  1. #11
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    You are trying to downgrade too far and the bootloader is blocking it.
    Find the correct firmware by installing Kies on your PC.
    Remove phone battery and leave out.
    Connect to Kies and put in Model and serial number.
    Follow instructions until you get to a firmware string with PDA/PHONE/CSC

    Write this down then CANCEL.
    Find this firmware and install with Odin.

  2. #12
    Junior Member
    Join Date
    Apr 2016
    Posts
    1
    I have exactly the same problem

  3. #13
    Junior Member
    Join Date
    Apr 2016
    Posts
    1
    plzzzzzz help
    <ID:0/004> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> N7100XXUFNL1_N7100OJVFOD1_N7100XXUFOA1_HOME.tar.md 5 is valid.
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/004> Odin v.3 engine (ID:4)..
    <ID:0/004> File analysis..
    <ID:0/004> SetupConnection..
    <ID:0/004> Initialzation..
    <ID:0/004> Get PIT for mapping..
    <ID:0/004>
    <ID:0/004> There is no PIT partition.
    <OSM> All threads completed. (succeed 0 / failed 1)
    what i can do

  4. #14
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    This is probably a memory (emmc) failure and will need a new motherboard.

    Will your phone go into Recovery Mode?
    If it will, then wipe cache then wipe data/factory reset before trying Odin again.

  5. #15
    Junior Member
    Join Date
    May 2016
    Posts
    1
    Hi All,

    I got below error on odin 3.11

    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/004> Added!!
    <ID:0/004> Odin engine v(ID:3.1101)..
    <ID:0/004> File analysis..
    <ID:0/004> SetupConnection..
    <ID:0/004> Initialzation..
    <ID:0/004> Get PIT for mapping..
    <ID:0/004> Firmware update start..
    <ID:0/004> SingleDownload.
    <ID:0/004> system.img
    <ID:0/004> NAND Write Start!!
    <ID:0/004> FAIL!
    <ID:0/004>
    <ID:0/004> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

    Is there way to fix it?
    I cleared the cache and factory data but still getting this error.

  6. #16
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    vdkolekar,
    This could be a processing fault.
    Check:
    1. You are using an original quality USB cable and not a thinner charging cable as they cannot transmit data.
    2. Connect directly to the PC USB port and not through a USB hub.
    3. Try another USB port.
    4. Try another Odin version.
    Not sure of the phone you are flashing, so try Odin version 3.09
    [ Login above or register to see download links. ]

  7. #17
    Junior Member
    Join Date
    Jun 2016
    Posts
    1
    Hi All, I have similar error using ODIN v3.11 on my GT-N7100; Following are messages from ODIN:

    <ID:0/003> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/003> Odin engine v(ID:3.1101)..
    <ID:0/003> File analysis..
    <ID:0/003> SetupConnection..
    <ID:0/003> Initialzation..
    <ID:0/003> Get PIT for mapping..
    <ID:0/003> Firmware update start..
    <ID:0/003> SingleDownload.
    <ID:0/003> boot.img
    <ID:0/003> NAND Write Start!!
    <ID:0/003> FAIL!
    <ID:0/003>
    <ID:0/003> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

  8. #18
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    Check out my previous post.

  9. #19
    Junior Member
    Join Date
    Jun 2013
    Posts
    1
    Your problem resolved or not? i am having same problem.....

  10. #20
    Junior Member
    Join Date
    Jan 2016
    Posts
    1
    Unmark select pit partion then run again FOR PIT PARTION ERROR

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •