Page 11 of 13 FirstFirst ... 910111213 LastLast
Results 101 to 110 of 123

Thread: Please Please Please Help. Complete(Write) Operation failed in ODIN for my edge.

  1. #101
    Junior Member
    Join Date
    May 2017
    Posts
    1

    Solved! plugged in another port/

    Quote Originally Posted by SabalSabal [ Login above or register to see download links. ]
    Hey guys,

    I was trying to root my never before rooted s6 edge today (64 gb 925 I) using the uni-kernel method using odin for 5.1.1. I put the kernel into AP, and it failed after some seconds thus resulting in the blue screen which says "error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software."
    I tried that and smart switch didn't recognise my device (maybe because USB debugging wasn't on).
    Thus I downloaded a stock recovery for my device and I thought I would flash it via ODI. Things go well and the progress bar is 3/4th of the way through on my device and it suddenly says FAIL (shown below). I've tried with ODIN 3.10.6 and with 3.10.7 with the same results

    <ID:0/003>Get PIT for Mapping
    <ID:0/003> Firmware update Start!!
    <ID:0/003> cm.bin <ID:0/003>
    sboot.bin
    <ID:0/003>NAND Write Start!!
    <ID:0/003> cm.bin
    <ID:0/003> boot.img
    <ID:0/003> recovery.img
    <ID:0/003> system.img
    <ID:0/003>
    <ID:0/003> Complete(Write) Operation failed.
    <OSM> All threads completed. (succeed 0/failed 1)

    No clue why it's doing this. I would appreciate any help possible.

    UPDATE: Got it working. Apparently all I had to do was change my USB cable and port . To anyone reading this through a future google search please try this before going to complicated suggestions especially involving pit files. A failed pit flash could ruin your motherboard. Shoutout to yakuza for helping.
    plugged my device cable in another port then flashed. saved my phone. thanks a lot!

  2. #102
    Junior Member
    Join Date
    Jul 2017
    Posts
    1
    Please how do I unlock my S6 edge network pls

  3. #103
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    Quote Originally Posted by Sanhassan23 [ Login above or register to see download links. ]
    Please how do I unlock my S6 edge network pls
    If your network will not provide a free unlock you will have to pay.
    Check your local repair centre or look online.
    Here on Sammobile there is SRS unlock:
    [ Login above or register to see download links. ]

  4. #104
    Junior Member
    Join Date
    Sep 2017
    Posts
    1
    <ID:0/010> FAIL!
    <ID:0/010>
    <ID:0/010> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

    HELP!!!! Please..... T_T

  5. #105
    Junior Member
    Join Date
    Nov 2017
    Posts
    3
    Apologies if this should go in a new thread.

    My Odin error are below. I've tried five cables, two computers, with smartswitch, etc., haven't gotten it to work. It's a SM-G925T. After it errors this way the phone shows, in black and red text, SECURE CHECK FAIL: (BOOTLOADER).

    <ID:0/003> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/003> Odin engine v(ID:3.1207)..
    <ID:0/003> File analysis..
    <ID:0/003> SetupConnection..
    <ID:0/003> Initialzation..
    <ID:0/003> Get PIT for mapping..
    <ID:0/003> Firmware update start..
    <ID:0/003> NAND Write Start!!
    <ID:0/003> SingleDownload.
    <ID:0/003> sboot.bin
    <ID:0/003> FAIL!
    <ID:0/003>
    <ID:0/003> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

  6. #106
    Administrator
    Join Date
    Jul 2012
    Posts
    5,717
    Quote Originally Posted by ElJamoquio [ Login above or register to see download links. ]
    Apologies if this should go in a new thread.

    My Odin error are below. I've tried five cables, two computers, with smartswitch, etc., haven't gotten it to work. It's a SM-G925T. After it errors this way the phone shows, in black and red text, SECURE CHECK FAIL: (BOOTLOADER).

    <ID:0/003> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/003> Odin engine v(ID:3.1207)..
    <ID:0/003> File analysis..
    <ID:0/003> SetupConnection..
    <ID:0/003> Initialzation..
    <ID:0/003> Get PIT for mapping..
    <ID:0/003> Firmware update start..
    <ID:0/003> NAND Write Start!!
    <ID:0/003> SingleDownload.
    <ID:0/003> sboot.bin
    <ID:0/003> FAIL!
    <ID:0/003>
    <ID:0/003> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)
    You have a US T-Mobile device (SM-G925T); what firmware did you flash?

  7. #107
    Junior Member
    Join Date
    Nov 2017
    Posts
    3
    Quote Originally Posted by henklbr [ Login above or register to see download links. ]
    You have a US T-Mobile device (SM-G925T); what firmware did you flash?
    I've tried four different firmwares. At least three of them were specifically labeled as for t-mobile.

    Labeled:

    G925TUVU5FQE1_G925TTMB5FQE1_TMB_USA_7.0
    G925TUVU5FQG3_G925TTMB5FQG3_TMB
    TMB-G925TUVS5FQG1
    XEU-G925FXXU5EQAC-20170310131800

    I do not recall the order. In retrospect I probably shouldn't have flashed that last one.

    The phone is now requesting I use SmartSwitch's emergency recovery, which isn't working.

  8. #108
    Administrator
    Join Date
    Jul 2012
    Posts
    5,717
    Quote Originally Posted by ElJamoquio [ Login above or register to see download links. ]
    I've tried four different firmwares. At least three of them were specifically labeled as for t-mobile.

    Labeled:

    G925TUVU5FQE1_G925TTMB5FQE1_TMB_USA_7.0
    G925TUVU5FQG3_G925TTMB5FQG3_TMB
    TMB-G925TUVS5FQG1
    XEU-G925FXXU5EQAC-20170310131800

    I do not recall the order. In retrospect I probably shouldn't have flashed that last one.

    The phone is now requesting I use SmartSwitch's emergency recovery, which isn't working.
    That's correct:

    You should NOT have flashed XEU-G925F -> That's for the INTERNATIONAL EXYNOS-version, NOT Snapdragon!

    If you are still able to go into DOWNLOAD-mode, and Odin recognizes your device, flash the latest FW from here:

    [ Login above or register to see download links. ]

    If not: then a visit to a Samsung Service Point is necessary...

  9. #109
    Junior Member
    Join Date
    Nov 2017
    Posts
    3
    Quote Originally Posted by henklbr [ Login above or register to see download links. ]
    That's correct:

    You should NOT have flashed XEU-G925F -> That's for the INTERNATIONAL EXYNOS-version, NOT Snapdragon!

    If you are still able to go into DOWNLOAD-mode, and Odin recognizes your device, flash the latest FW from here:

    [ Login above or register to see download links. ]

    If not: then a visit to a Samsung Service Point is necessary...
    Thanks! I had actually already downloaded that firmware and tried to flash it, but maybe not with the right combo of computer, cable, Odin, etc.

    With Odin 3.11.1 and G925TUVU5FQG3_G925TTMB5FQG3_TMB I managed to get it working again.

    Thanks!!!!!!

  10. #110
    Junior Member
    Join Date
    Jan 2018
    Posts
    1
    what about


    <ID:0/004> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/004> Odin engine v(ID:3.1210)..
    <ID:0/004> File analysis..
    <ID:0/004> SetupConnection..
    <ID:0/004> Initialzation..
    <ID:0/004> Get PIT for mapping..
    <ID:0/004> Firmware update start..
    <ID:0/004> NAND Write Start!!
    <ID:0/004> SingleDownload.
    <ID:0/004> sboot.bin
    <ID:0/004> FAIL!
    <ID:0/004>
    <ID:0/004> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •