Page 10 of 13 FirstFirst ... 89101112 ... LastLast
Results 91 to 100 of 123

Thread: Please Please Please Help. Complete(Write) Operation failed in ODIN for my edge.

  1. #91
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    Are you not able to restore your EFS?
    If not then you need an EFS/IMEI repair.

    This cannot be done with software alone.
    Find a shop with Z3X box or similar.

  2. #92
    Junior Member
    Join Date
    Jun 2013
    Posts
    15
    I try to restore with TWRP but nothing happend.
    So it is only posible solution to go to service shop?

    Btw I want to ask you, why I have so much FC always.
    SOmetimes phone reboot fromitself and stay on SAMSUNG logo. After that I need to clear cache only and it boot again.
    Is it posible that my flash is bad?
    Or RAM of motherboard?

  3. #93
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    The EFS is an integral part of the phone operation.
    The kernel is probably ordering the phone to search for a network connection, but as you have no IMEI this results in no solution.
    Phones react to this by freezing.

    Get the EFS/IMEI sorted out at a repair shop and all should be OK again.

  4. #94
    Junior Member
    Join Date
    Feb 2017
    Posts
    1
    where would i find my PIT file, i use SM-G920f and (UK-EE)

  5. #95
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    Quote Originally Posted by thegoldgolemyt [ Login above or register to see download links. ]
    where would i find my PIT file, i use SM-G920f and (UK-EE)
    Here you are:
    SM-G920F EVR
    ZEROFLTE_EUR_OPEN_HIDDEN150M.pit
    [ Login above or register to see download links. ]

  6. #96
    Junior Member
    Join Date
    Feb 2017
    Posts
    1
    Quote Originally Posted by SabalSabal [ Login above or register to see download links. ]
    Hey guys,

    I was trying to root my never before rooted s6 edge today (64 gb 925 I) using the uni-kernel method using odin for 5.1.1. I put the kernel into AP, and it failed after some seconds thus resulting in the blue screen which says "error has occurred while updating the device software. Use the emergency recovery function in the smart switch PC software."
    I tried that and smart switch didn't recognise my device (maybe because USB debugging wasn't on).
    Thus I downloaded a stock recovery for my device and I thought I would flash it via ODI. Things go well and the progress bar is 3/4th of the way through on my device and it suddenly says FAIL (shown below). I've tried with ODIN 3.10.6 and with 3.10.7 with the same results

    <ID:0/003>Get PIT for Mapping
    <ID:0/003> Firmware update Start!!
    <ID:0/003> cm.bin <ID:0/003>
    sboot.bin
    <ID:0/003>NAND Write Start!!
    <ID:0/003> cm.bin
    <ID:0/003> boot.img
    <ID:0/003> recovery.img
    <ID:0/003> system.img
    <ID:0/003>
    <ID:0/003> Complete(Write) Operation failed.
    <OSM> All threads completed. (succeed 0/failed 1)

    No clue why it's doing this. I would appreciate any help possible.

    UPDATE: Got it working. Apparently all I had to do was change my USB cable and port . To anyone reading this through a future google search please try this before going to complicated suggestions especially involving pit files. A failed pit flash could ruin your motherboard. Shoutout to yakuza for helping.
    Here is the solution worked for me. It took me 4 good days to read entire internet to find the solution.. cut the story short.. I have added PIT, BL,AP AND CP to Odin.

    Here are the steps: ( I am not a master and I can only explain what I did only and on My note 4)
    1. so.. google and download Modem and Bootloader which are your BL and CP . It comes as a Same file. Then PIT file.
    2 . Go to Sammobile and search for your firmware and note down PDA ,CSC and Product code. Download the file Or..
    If you are not downloading firmware from Sammobile, download SamFirm and use the settings as below to search and download the firmware
    Model : your phone model (eg. SM-N910G)
    Region : Product code from samemobile
    tick Manual
    enter your PDA and CSC and PDA number for the Phone
    Tick Decrypt Automatically
    Tick Auto ( yes it was Manual before)
    Click Check Update
    If File, Version appears on the right side go ahead and click Download
    3. Download Odin 3.09 and open it
    4. Add PIT file to PIT, Bootloader and modem file to BL and CP
    5. Turn off your phone. Do this key combination Volum Down, Home, Power . When it prompt to download mode or restart, Press Volume Up button to
    start download mode
    6.Connect the original USB cable to your pc and to your Phone.
    7. In Odin you will see Added!! and ID:COM has a number . It means your phone has detected properly.
    8. Now click on Start and wait until it will reboot.
    9. If you Get in to No Command screen after reboot, leave it for a minute as it is and press the power button and it will take you to a menu, wher you can go to Wipe Cach. Do it. Go back and reboot. If screen doesnt come, pull out the battery and put it back after few seconds and click the power button.
    Then you will see it start setting up.


    This worked for me and hope it will help you too.

  7. #97
    Junior Member
    Join Date
    Jul 2015
    Posts
    1
    i am trying to downgade my s6 g920f with firmware G920FXXU1AOCV_G920FPHN1AOCN_G920FXXU1AOCW_HOME.tar , G920FXXU3COI9_G920FPHN3COJ1_G920FXXU3COI9_HOME.tar ,G920FXXU1AOE3_G920FPHN1AODQ_G920FXXU1AOE3_HOME.ta r but having error i changed the cable and pc too but same problem, i have alredy installed g920fxxu5dpld.
    i am facing it
    <ID:0/003> Odin engine v(ID:3.1101)..
    <ID:0/003> File analysis..
    <ID:0/003> SetupConnection..
    <ID:0/003> Initialzation..
    <ID:0/003> Get PIT for mapping..
    <ID:0/003> Firmware update start..
    <ID:0/003> SingleDownload.
    <ID:0/003> sboot.bin
    <ID:0/003> NAND Write Start!!
    <ID:0/003> FAIL!
    <ID:0/003>
    <ID:0/003> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

  8. #98
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    hassaan5700,
    You cannot downgrade.
    The downgrade has been blocked by the secure bootloader (sboot)

  9. #99
    Junior Member
    Join Date
    Dec 2016
    Posts
    2
    I am trying to flash Samsung SM-J710FN (2016) with odin 3 v3.12. but i am getting error complete write operation failed please resolve my problem.
    Last edited by Swades1; 04-04-2017 at 12:50.

  10. #100
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    The firmware that you are trying to install is a downgrade.

    Use the latest version here:
    [ Login above or register to see download links. ]

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •