Page 1 of 5 123 ... LastLast
Results 1 to 10 of 42

Thread: [SOLVED] Return to Bada 1.2 (from 2.0) Kies Working, Romanian and maybe more!

  1. #1
    Member
    Join Date
    Dec 2011
    Posts
    36

    [SOLVED] Return to Bada 1.2 (from 2.0) Kies Working, Romanian and maybe more!

    First i think this should become Sticky!

    To make it work you need:
    Flash Program: Multiloader 5.65
    Firmware: S8530XXJKA ## 1.2 2010 S8530OXAJK7 Open Europe
    Firmware Update: S8530XXKF1 ## * 1.2 2011 S8530OXFJK3 Serbia (the CSC is for Eastern Europe)
    Hotfile link for FirmwarePack:[ Login above or register to see download links. ]
    *This CSC contains: KOR, BHT, CNX, GBL, HAT, MOT, MSR, ORO, SIM, VIP, COA, SMO, TOP, TSR, CRG, CRO,
    MBM, MTL, TWO, CMF, TMT, VVT, TEB, SEB, TRA.

    Steps:

    1. Flash your phone like this: (USING S8530XXJKA - CSC S8530OXAJK7)

    1. To set download mode on your device, you have to press Volume DOWN + Camera Key and Power Button.
    2.Run S8530 Wave II downloader.
    3.Select LSI
    4.Tick Boot Change and and Tick Full Download
    5.Click Boot and select Boot folder: (named as BOOTFILES)
    6.Click AMSS and select : amss.bin
    7.Click Apps and select : apps_compressed.bin
    8.Click Rsrc1 and select : Rsrc_S8530_Open_Europe_Common.rc1
    9.Click Rsrc2 and select : Rsrc2_S8530_Open_Euro_Common (Low/Mid).rc2
    10.Click Factory FS and select : FactoryFs_S8530_Open_Europe_Common.ffs
    11.Click CSC and select : S8530XXXXX.csc
    12.Click SHP APP and select : ShpApp.app
    13.Click FOTA and select : bplib_S8530OpEuroCommon.fota
    14.After connecting the mobile with PC, Multiloader should find the COM port automatically. If it cannot find COM port please connect USB cable again and press port search.
    15.Click Download [You will see the downloading progress bar].
    16.After finishing downloading, the mobile will be starting automatically.
    17.Now go to menu and make a Factory reset.

    2. You need to update your firmware like this: (USING S8530XXKF1 - CSC S8530OXFJK3)
    * It looks like the first flash but is not, pay attention at each step - i put italic characters on the differences.

    1. To set download mode on your device, you have to press Volume DOWN + Camera Key and Power Button.
    2.Run S8530 Wave II downloader.
    3.Select LSI
    4.Tick Boot Change and and Tick Full Download
    5.Click Boot and select Boot folder: (named as BOOTFILES)
    6.Click AMSS and select : amss.bin
    7.Click Apps and select : apps_compressed.bin
    8.Click Rsrc1 and select : Rsrc_S8530_Open_Europe_Common.rc1
    9.Click Rsrc2 and select : Rsrc2_S8530_Open_Euro_Common (Low/Mid).rc2
    10.Click CSC and select : S8530XXXXX.csc
    11.Click SHP APP and select : ShpApp.app
    12.Click FOTA and select : bplib_S8530OpEuroCommon.fota
    13.Click PFS and select : PFS_S8530_Open_Europe_Common_XXKF1.pfs
    14.After connecting the mobile with PC, Multiloader should find the COM port automatically. If it cannot find COM port please connect USB cable again and press port search.
    15.Click Download [You will see the downloading progress bar].
    16.After finishing downloading, the mobile will be starting automatically.
    17.Now go to menu and make a Factory reset.

    3. Now you need to install you country CSC to do this you need to type:

    *#272*TIME# for example if the time is 12.45 it will be *#272*1245# ,
    if the time is 03.25 it will be *#272*0325#
    Now you just need to choose your CSC code, for example : Romania: CNX-Vodafone, ORO-Orange etc. and press Install.

    All these steps will delete all data from your phone i recommend you to make a backup to all your data before flashing.

    Good LUCK!

    *It worked for me without any problems, i will not be responsible for any damages your phones may have during the operations i described or after.(just to be safe )

    * If you have problems with the firmwares from the site please PM me with your full e-mail and i will send you the files i used, as soon as possible.
    Last edited by !SETH!; 07-02-2012 at 20:19. Reason: Solved the problem and sharring :D

  2. #2
    Member
    Join Date
    Dec 2011
    Posts
    36
    Problem solved! Please change the thread title. Thanks!

  3. #3
    Junior Member
    Join Date
    Dec 2011
    Posts
    2
    thank you. problem solved for me.

  4. #4
    Junior Member
    Join Date
    Nov 2011
    Posts
    3
    it works for me!thank you!

  5. #5
    Junior Member
    Join Date
    Oct 2011
    Posts
    1
    Thank you ! Thank you! Thank you man you are greath.now i am hapy it works and i weith bada 2.0 oficialy to update my fonne

  6. #6
    Junior Member
    Join Date
    Oct 2011
    Posts
    1
    BIg Thanks

  7. #7
    Junior Member
    Join Date
    Dec 2011
    Posts
    1
    multumesc

  8. #8
    Member
    Join Date
    Nov 2011
    Posts
    38
    Sorry for edit, no working for me. I just have some csc like KOR , XEU , Ro language not available.
    Last edited by radden; 18-01-2012 at 19:45.

  9. #9
    Junior Member
    Join Date
    Nov 2011
    Posts
    1
    is it available to have swedish csc?

  10. #10
    Member
    Join Date
    Dec 2011
    Posts
    36
    @radden are you did all the steps how i wrote in the post? there are a few differences between flashing a full firmware and an upgrade

    @jullek57 i think so, you just need to find your country csc code and search it in the firmware download section.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •