Page 1 of 2 12 LastLast
Results 1 to 10 of 16

Thread: Problem in SM-T217T Firmware

  1. #1
    Junior Member
    Join Date
    Mar 2013
    Posts
    7

    Problem in SM-T217T Firmware

    I have Samsung Galaxy Tab T217A

    I downloaded firmware from here

    http://www.sammobile.com/firmwares/d.../SM-T217A/ATT/

    But installing Fail then Tab no boot

    What's problem in Firmware ?

  2. #2
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,714
    Without being able to boot it is difficult to help, as we need to see your Odin log so that we can see where it is failing?

    Can you put your Tab in Download or Recovery Mode?
    Last edited by greenman; 25-10-2014 at 03:16.

  3. #3
    Junior Member
    Join Date
    Mar 2013
    Posts
    7
    i can put it only in download mode , not able to put it in recovery mode

    it's fail after writting copting as below

    <ID:0/013> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> T217AUCUAMHC_T217AATTAMHC_T217AUCUAMHC_HOME.tar.md 5 is valid.
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/013> Odin v.3 engine (ID:13)..
    <ID:0/013> File analysis..
    <ID:0/013> SetupConnection..
    <ID:0/013> Initialzation..
    <ID:0/013> Get PIT for mapping..
    <ID:0/013> Firmware update start..
    <ID:0/013> boot.img
    <ID:0/013> NAND Write Start!!
    <ID:0/013> recovery.img
    <ID:0/013> system.img.ext4
    <ID:0/013>
    <ID:0/013> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

  4. #4
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,714
    The problem is writing to your NAND.
    This is probably for one or more of te following reasons:
    1. You are not using an original quality USB cable.
    2. You are not connecting directly to the PC USB, but through a USB hub.
    3. Try another PC USB port.
    4. Try another Odin version - try 3.07
    Odin 3.07 - XDA-Developers

    5. Make sure you do not have Kies and Odin running at the same time.

  5. #5
    Junior Member
    Join Date
    Mar 2013
    Posts
    7
    I changed Cable and Computer And Odin version , & i connecting directly to the PC , but same resault

    " Secure Check Fail : System "

  6. #6
    Junior Member
    Join Date
    Mar 2013
    Posts
    7
    <ID:0/003> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> T217AUCUAMHC_T217AATTAMHC_T217AUCUAMHC_HOME.tar.md 5 is valid.
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/003> Odin v.3 engine (ID:3)..
    <ID:0/003> File analysis..
    <ID:0/003> SetupConnection..
    <ID:0/003> Initialzation..
    <ID:0/003> Get PIT for mapping..
    <ID:0/003> Firmware update start..
    <ID:0/003> boot.img
    <ID:0/003> NAND Write Start!!
    <ID:0/003> recovery.img
    <ID:0/003> system.img.ext4
    <ID:0/003> FAIL! (Auth)
    <OSM> All threads completed. (succeed 0 / failed 1)

  7. #7
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,714
    Looks like a locked bootloader, and cannot find an unlock method at the mo.

  8. #8
    Junior Member
    Join Date
    Mar 2013
    Posts
    7
    no hope ?

  9. #9
    Junior Member
    Join Date
    Nov 2015
    Posts
    7
    i have the same problem,how can i solve this problem?

  10. #10
    Junior Member
    Join Date
    Nov 2015
    Posts
    7
    Please help to solve the problem.i need pit file fot odin samsung galaxy tab 3 sm-t217a

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •