Page 4 of 4 FirstFirst ... 234
Results 31 to 36 of 36

Thread: Flashing firmware with odin = fail

  1. #31
    Junior Member
    Join Date
    Mar 2017
    Posts
    2
    Thank You so much for the help But only BL CS CSC are working
    <ID:0/003> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> BL_G360HXXU0ANK6_CL257545_QB2996647_REV04_user_low _ship.tar.md5 is valid.
    <OSM> CP_G360HXXU0ANK6_CL257545_QB2996647_REV04_user_low _ship.tar.md5 is valid.
    <OSM> CSC_OXE_G360HOXE0ANK7_CL257545_QB2996647_REV04_use r_low_ship.tar.md5 is valid.
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/003> Odin v.3 engine (ID:3)..
    <ID:0/003> File analysis..
    <ID:0/003> SetupConnection..
    <ID:0/003> Initialzation..
    <ID:0/003> Set PIT file..
    <ID:0/003> DO NOT TURN OFF TARGET!!
    <ID:0/003> Get PIT for mapping..
    <ID:0/003> Firmware update start..
    <ID:0/003> spl.img
    <ID:0/003> NAND Write Start!!
    <ID:0/003> sboot.bin
    <ID:0/003> sboot2.bin
    <ID:0/003> param.lfs
    <ID:0/003> SPRDCP.img
    <ID:0/003> Transmission Complete..
    <ID:0/003> Now Writing.. Please wait about 2 minutes
    <ID:0/003> Receive Response form LOKE
    <ID:0/003> SPRDDSP.img
    <ID:0/003> Transmission Complete..
    <ID:0/003> Now Writing.. Please wait about 2 minutes
    <ID:0/003> Receive Response form LOKE
    <ID:0/003> nvitem.bin
    <ID:0/003> Transmission Complete..
    <ID:0/003> Now Writing.. Please wait about 2 minutes
    <ID:0/003> Receive Response form LOKE
    <ID:0/003> cache.img
    <ID:0/003> hidden.img
    <ID:0/003> RQT_CLOSE !!
    <ID:0/003> RES OK !!
    <ID:0/003> Completed..
    <OSM> All threads completed. (succeed 1 / failed 0)


    But now its on Boot loop. stuck on Samsung galaxy core prime logo and when i enter into hard reset on android dead icon appears .

    but when i start with firmware upgrade with following files APodin again failed at system.img
    Last edited by Anumfarhad; 06-04-2017 at 13:52.

  2. #32
    Junior Member
    Join Date
    Apr 2017
    Posts
    1
    hello Galaxy Knighters,

    I am havng the same issues, i can not install the at&t stock rom back on my galaxy s3 odin fails. eg

  3. #33
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    Quote Originally Posted by GalaxyCasper [ Login above or register to see download links. ]
    hello Galaxy Knighters,

    I am havng the same issues, i can not install the at&t stock rom back on my galaxy s3 odin fails. eg
    Can you take the battery out of your phone and leave it out until the end of this procedure.
    Now install Kies on your PC
    [ Login above or register to see download links. ]

    Now follow this procedure wuth battery out.
    When you get to firmware to install, write down the firmware and CANCEL.
    [ Login above or register to see download links. ]

    Post or find your firmware to install with Odin.

  4. #34
    Junior Member
    Join Date
    Aug 2017
    Posts
    2
    i have download odin from this site :
    but it not works in my PC.
    Can anyone provide me working odin download link ?
    Last edited by greenman; 11-09-2017 at 06:07.

  5. #35
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    Quote Originally Posted by jiten634 [ Login above or register to see download links. ]
    i have download odin from this site :
    but it not works in my PC.
    Can anyone provide me working odin download link ?
    For the s4 mini try this Odin version
    [ Login above or register to see download links. ]

  6. #36
    Junior Member
    Join Date
    May 2019
    Posts
    1
    <ID:0/006> Added!!
    <OSM> Enter CS for MD5..
    <OSM> Check MD5.. Do not unplug the cable..
    <OSM> Please wait..
    <OSM> Checking MD5 finished Sucessfully..
    <OSM> Leave CS..
    <ID:0/006> Odin engine v(ID:3.1301)..
    <ID:0/006> File analysis..
    <ID:0/006> Total Binary size: 18 M
    <ID:0/006> SetupConnection..
    <ID:0/006> Initialzation..
    <ID:0/006> Get PIT for mapping..
    <ID:0/006> Firmware update start..
    <ID:0/006> NAND Write Start!!
    <ID:0/006> SingleDownload.
    <ID:0/006> recovery.img
    <ID:0/006> RQT_CLOSE !!
    <ID:0/006>
    <ID:0/006> Complete(Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

    What means this? Please if someone knows what I can do, let me know.
    I have a Samsung Galaxy A5 2017

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •