Results 1 to 6 of 6

Thread: Firmware Crashed

  1. #1
    Junior Member
    Join Date
    Apr 2014
    Posts
    3

    Firmware Crashed

    hello
    I am from pakistan.I have GT-P3100 tab during rooting my system crashed and its firmware corrupted .now i don't now which is firmware is on my tab what i can do now .
    Now on screen only error massage "Firmware upgrade encountered an issue .please recovery mode in Kies try again"
    but in Kies it not connected and i don't know about it all detail like country ,PDA,CSC and MODEM.
    till me how i can get it or how can i reinstall firmware and which one.

  2. #2
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,703
    This is the way to recover from that error.
    http://androidcentral.us/2013/09/how...issue-on-kies/

    If Kies will not cooperate, then install your firmware in Download mode with Odin.
    Firmware here:
    http://www.sammobile.com/firmwares/1/

    Install method here:
    http://www.android.gs/update-galaxy-...-4-2-2-xxdmg6/

  3. #3
    Junior Member
    Join Date
    Apr 2014
    Posts
    3
    Thanks but when i connect with kies and gave model and S/N no then massage come its not supported.and i don't remember the ver of firmware which company installed how i can get out of this

  4. #4
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,703
    Quote Originally Posted by mtariqniaz View Post
    Thanks but when i connect with kies and gave model and S/N no then massage come its not supported.and i don't remember the ver of firmware which company installed how i can get out of this
    Post #2 gives you two methods to install your firmware.
    Try the odin method.

  5. #5
    Junior Member
    Join Date
    Apr 2014
    Posts
    3
    I have used this 2nd method .
    I try both firmware for my country it completed with ODIN and massage after complete come PASS but when Tab reset it start and after logo of Tab 2 when it come SAMSUNG log its stopped and after along time its not work .
    is it possible to find out my original firmware from IMEI or S/N no
    S/N :: R31C50GNQRA

  6. #6
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,703
    Quote Originally Posted by mtariqniaz View Post
    I have used this 2nd method .
    I try both firmware for my country it completed with ODIN and massage after complete come PASS but when Tab reset it start and after logo of Tab 2 when it come SAMSUNG log its stopped
    What you are describing here is a bootloop, and quite common after installing firmware with odin.
    Do this:
    Put yout Tab into Recovery Mode
    Reboot into Recovery mode by pressing and holding the volume up and home keys at the same time.
    In Recovery Mode you can wipe cache then wipe data/factory reset (important) this will clear away any conflicts with the previous firmware that is stopping your Tab from booting.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •