Page 1 of 5 123 ... LastLast
Results 1 to 10 of 46

Thread: Error odin to 4.4.2 (NAND Write Start ... fail) and can not use recovery mode.

  1. #1
    Junior Member
    Join Date
    Mar 2013
    Posts
    7

    Question Error odin to 4.4.2 (NAND Write Start ... fail) and can not use recovery mode.

    hi all, I have a problem with my N8000.

    this occurs when installing the 4.4.2 (germany) upgrade with odin SamMobile 3.0.9 and everything was pefect but at night it reset and left the loop "samsung".

    I can not use recovery mode and use odin to install recovery

    I tried with odin 3.0.7 and 1.8.5

    Enter CS for MD5 <OSM> ..
    <OSM> Check MD5 .. Do not unplug the cord ..
    <OSM> Please wait ..
    <OSM> N8000XXUDNE4_N8000OXADNE4_N8000XXUDNE1.tar.md5 is valid.
    Checking MD5 finished Sucessfully <OSM> ..
    <OSM> Leave CS ..
    <ID:0/011> Odin v.3 engine (ID: 11) ..
    <ID:0/011> File analysis ..
    <ID:0/011> SetupConnection ..
    <ID:0/011> Initialzation ..
    <ID:0/011> Get PIT for mapping ..
    <ID:0/011> Firmware update start ..
    <ID:0/011> SingleDownload.
    <ID:0/011> sboot.bin
    <ID:0/011> NAND Write Start!
    <ID:0/011> FAIL!
    <ID:0/011>
    <ID:0/011> Complete (Write) operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

    I tried it in odin 1.85, 3.07, 3.09.

    I have to use other files as pit?

  2. #2
    Premium Member
    Join Date
    Oct 2011
    Posts
    961
    Dear Diego,
    How this here only one man did not help on XDA maybe : greenman.

    I read This :
    [ Login above or register to see download links. ]

    You think well that pit can solve the problem but yet I did not see pit on 4.4.2, some version leak on India contains him maybe.

    Taste this :
    [ Login above or register to see download links. ]

    Best regards.
    Last edited by Dychowski; 18-06-2014 at 00:05.

  3. #3
    Premium Member
    Join Date
    Oct 2011
    Posts
    961
    Hi Diego,
    I have for You pit under 4.4.2 :-) :

    [ Login above or register to see download links. ]

    Please read this :
    [ Login above or register to see download links. ]

    Best regards,
    Andrew

    ---------------------------------------------------------------------------------------------
    For Grenman

    Good morning my friend John :-).
    Last edited by Dychowski; 18-06-2014 at 14:55.

  4. #4
    Junior Member
    Join Date
    Mar 2013
    Posts
    7
    Quote Originally Posted by Dychowski [ Login above or register to see download links. ]
    Hi Diego,
    I have for You pit under 4.4.2 :-) :

    [ Login above or register to see download links. ]

    Please read this :
    [ Login above or register to see download links. ]

    Best regards,
    Andrew

    ---------------------------------------------------------------------------------------------
    For Grenman

    Good morning my friend John :-).
    thanks for answering , but no resolutions to problems, I went the following error.


    <ID:0/004> Added!!
    <ID:0/004> Odin v.3 engine (ID:4)..
    <ID:0/004> File analysis..
    <ID:0/004> SetupConnection..
    <ID:0/004> Initialzation..
    <ID:0/004> Set PIT file..
    <ID:0/004> DO NOT TURN OFF TARGET!!
    <ID:0/004> FAIL!
    <ID:0/004>
    <ID:0/004> Re-Partition operation failed.
    <OSM> All threads completed. (succeed 0 / failed 1)

    [ Login above or register to see download links. ]


    [ Login above or register to see download links. ]
    [ Login above or register to see download links. ]

    I was thinking of possible causes:

    - I have a non original cable but that cable did the flash to 4.4.2. ,
    - Install windows 8.1 yesterday but I'm switching back to windows 7, windows 8 affect odin?
    - I will install the window 7 in the morning and I'll try again.

    I test rom stock of india? D:
    Attached Thumbnails Attached Thumbnails error pit.jpg  
    Last edited by diego67ratten; 19-06-2014 at 06:08. Reason: imagen

  5. #5
    Premium Member
    Join Date
    Oct 2011
    Posts
    961
    My mobile tests on Windows 8.1 64-bit and he even Studies he goes without problems now here rather there is no problem.
    Cable, ? rather also not because you see in Odin COM4 that is there is the transport among PC and tablet.
    Does Kies see tablet correctly ?
    Did you switch off Kies as you made update ?
    As were you making update you switched off antvirus ?
    I do not have this model unfortunately and do not have as to test all possible functions.

    It is these two PIT FILE maybe tasting worth, pull down both and India make on the version the test once again:
    [ Login above or register to see download links. ]

    have two various files NOTE.PIT, they differ the size now this maybe two various, test but on the version full that is India.
    As all will be successful, then you will update version Germany then but do still in the mode recovery wipe date and wipe cache.

    Andrew

  6. #6
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,810
    Good morning Andrew.
    Good to see you back on the forum.
    We've missed your considerable expertise.

  7. #7
    Premium Member
    Join Date
    Oct 2011
    Posts
    961
    Good morning John , to see You again pleasantly :-)
    I do not have specialist knowledge unfortunately but all tests what he will fall me in the hand and I the time know something :-).
    If he had Your knowledge, I would unlock the service of GSM and would become very rich :-).
    I am pleased to Danny perceived Mobilecrackers at last and made from him the moderator because and the good man.

  8. #8
    Junior Member
    Join Date
    Jun 2014
    Posts
    10
    Hi. I had a similar problem.

    Tried to do a rollback from official 4.4.2 to official 4.1.2 via Odin.
    Since the new official bootloader doesn't allow rollback procedures, I got the missing magic string error and the NAND write fail at Odin.
    The tablet bricked, not even showing Samsung Note 10.1 logo. I could only access to ODIN mode, not recovery even. *YIKES*

    After a day and a half trying to recover it, I removed the SIM card, the SD card and I loaded the Samsung Stock recovery file via ODIN, then rebooted. I got as far as the Samsung logo which was an improvement compared to what I had. Then I proceeded to reload the 4.4.2 firmware (INU-N8000XXUDNE6) and rebooted the device. Went into recovery mode, restored factory defailts and, voilá!

    It is working now on 4.4.2, though it is not the Spanish firmware it shoud be, at least the tablet is functional.
    Last edited by J4m4cuc0; 22-06-2014 at 21:44.

  9. #9
    Junior Member
    Join Date
    Mar 2013
    Posts
    7
    Quote Originally Posted by J4m4cuc0 [ Login above or register to see download links. ]
    Hi. I had a similar problem.

    Tried to do a rollback from official 4.4.2 to official 4.1.2 via Odin.
    Since the new official bootloader doesn't allow rollback procedures, I got the missing magic string error and the NAND write fail at Odin.
    The tablet bricked, not even showing Samsung Note 10.1 logo. I could only access to ODIN mode, not recovery even. *YIKES*

    After a day and a half trying to recover it, I removed the SIM card, the SD card and I loaded the Samsung Stock recovery file via ODIN, the rebooted. Got as far as the Samsung logo which was an improvement compared to what I had. Then I proceeded to reload the 4.4.2 firmware (INU-N8000XXUDNE6) and rebooted the device. Went into recovery mode, restored factory defailts and, voilá!

    It is working now on 4.4.2, though it is not the Spanish firmware it shoud be, at least the tablet is functional.
    hello, which is the recovery file you installed it?: Confused:

  10. #10
    Junior Member
    Join Date
    Jun 2014
    Posts
    10
    Quote Originally Posted by diego67ratten [ Login above or register to see download links. ]
    hello, which is the recovery file you installed it?: Confused:
    Hi. I may have not explained myself correctly.

    I bricked my GT-N8000 trying to roll back its firmware, the results were:
    The tablet would switch on and say there was an error on firmware update and I needed to fix it via Kies (which proved useless). It would not even get to the Samsung Galaxy Note 10.1 logo screen.
    I could only access to ODIN bootloader but I could not access to recovery mode.

    I decided to load the stock recovery partition file. [ Login above or register to see download links. ]. It is a rooting method with a custom recovery file (CWM), but the author also has a link to the stock recovery file in this page.

    I loaded the Stock Recovery partition file using ODIN. After rebooting, the tablet successfully displayed the Samsung Galaxy Note 10.1 initial logo, but it got not not further. It was then when I could load the firmware (INU-N8000XXUDNE6) file. The file loaded correctly, the tablet rebooted and I then I could access to recovery mode. I wiped all the user data and restored the tablet to factory defaults.

    And voilá!


Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •