Page 1 of 2 12 LastLast
Results 1 to 10 of 13

Thread: How to install N910C Poland 6.0.1

  1. #1
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809

    How to install N910C Poland 6.0.1

    If you have an SM-N910C then Marshmallow is now available using the Poland XEO firmware.

    WARNING:
    Installing this firmware may make it difficult to return to your current CSC code as explained here:
    [ Login above or register to see download links. ]

    If you want to go ahead and install Poland XEO firmware on your N910C then you will need to download the following firmware:

    [ Login above or register to see download links. ]
    Do you need a PIT file?
    Dial *#1234# and look at your CSC code.
    Does it have OXA or OXE?
    If so you will probably not need a pit file.

    All other CSC codes should install the XEO firmware with this PIT file (provided by our technical moderator yakapa40)

    SM-N910C OXA multi CSC ( BTU CPW DBT ITV KOR XEF XEO )
    TRELTE_EUR_OPEN.pit
    [ Login above or register to see download links. ]
    Install as in this guide
    [ Login above or register to see download links. ]

  2. #2
    Junior Member
    Join Date
    Dec 2015
    Posts
    2
    same error mate
    and now it doesn`t want to accept any other firmware........ tried 6 so far
    Last edited by zozouniq2014; 12-04-2016 at 01:40.

  3. #3
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    Quote Originally Posted by zozouniq2014 [ Login above or register to see download links. ]
    same error mate
    and now it doesn`t want to accept any other firmware........ tried 6 so far
    Put in download mode.
    Connect to SmartSwitch.
    Put in model number and serial number.
    Your original firmware will be installed.
    [ Login above or register to see download links. ]

  4. #4
    Junior Member
    Join Date
    Feb 2015
    Posts
    2
    I flashed my SM-N910C in the same way as always. Now i have Android 6.0.1 but there are no shortcut buttons when i slide down. Please help anyone.

  5. #5
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    Quote Originally Posted by xnickolas [ Login above or register to see download links. ]
    I flashed my SM-N910C in the same way as always. Now i have Android 6.0.1 but there are no shortcut buttons when i slide down. Please help anyone.
    Put phone into Recovery Mode and wipe cache then wipe data/factory reset to complete your XEO transfer.

  6. #6
    Junior Member
    Join Date
    Feb 2015
    Posts
    2
    Thanks greenman. You just saved my note.

  7. #7
    Junior Member
    Join Date
    Apr 2016
    Posts
    1
    Sorry I'm a noob. Why do we need a PIT file?

  8. #8
    Senior Member
    Join Date
    Dec 2011
    Posts
    41,809
    Quote Originally Posted by xianbeso [ Login above or register to see download links. ]
    Sorry I'm a noob. Why do we need a PIT file?
    See post #1.

  9. #9
    Junior Member
    Join Date
    Nov 2013
    Posts
    3
    Good Day sir..
    I'm a newbie here.

    I have smn910c note 4 U.A.E original firmware and I flash 6.0.1 update Poland version via odin bec. I cant wait to try the new update and everything run smoothly.i am in Kuwait.
    so my question is..can I use this firmware in the Philippines?is theres nothing to worry especially about the gsm data and Philippine mobile carrier?tnx in advance..

  10. #10
    Junior Member
    Join Date
    Nov 2013
    Posts
    3
    no reply there???..

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •