It is the same with the smartswitch. I had to use the wakelock app to be able to use the phone. I guess it's the memory/motherboard issue for me.Quote:
This evening, I got a different error, something about the kernel.. I shut it down and it didn't come on again until about 30 mintues later.
I have given up on this thing and will use my old S5 until I can find a suitable replacement. I will miss the S Pen and the big screen.
i am having the same problem with 910F
here is something that i have tried .
lineage OS 14.1 with twrp-3.0.2-0-trltexx
yes it Does stuck at startup as goes into download mode with mmc error .
and takes long to boot but when it runs it does not hang or stuck fore seconds like in stock based roms.
and please use wakelock power manager always running with notification in status bar
and better if you dont use memory card.
this is how i could manage to use my phone the best way possible.
[ Login above or register to see download links. ]
<ID:0/003> Added!!
<ID:0/003> Odin engine v(ID:3.1005)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003> Firmware update start..
<ID:0/003> SingleDownload.
<ID:0/003> aboot.mbn
<ID:0/003> NAND Write Start!!
<ID:0/003> boot.img
<ID:0/003> cache.img.ext4
<ID:0/003> hidden.img.ext4
<ID:0/003> modem.bin
<ID:0/003> NON-HLOS.bin
<ID:0/003> recovery.img
<ID:0/003> rpm.mbn
<ID:0/003> sbl1.mbn
<ID:0/003> sdi.mbn
<ID:0/003> system.img.ext4
<ID:0/003> FAIL! (Write)
<ID:0/003>
<ID:0/003> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
HI This thread seems to describe mostly what I've been going through in the last 48 hours...
So... I've updated the Pit with the one above. the recovery file with the one above...
Then tried to use the LTE-A repair firmware above N910FXXU2ANK4...
Regardless of what I seem to do I get this response from Odin...
<ID:0/007> Removed!!
<ID:0/007> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> BL_N910FXXU1ANK4_CL3311829_QB3005660_REV00_user_lo w_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> AP_N910FXXU1ANK4_CL3311829_QB3005660_REV00_user_lo w_ship_MULTI_CERT.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CP_N910FXXU1ANK4_REV00_CL_1795169.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> CSC_OXA_N910FOXA1ANK4_CL3311829_QB3005660_REV00_us er_low_ship_MULTI_CERT_.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/007> Odin v.3 engine (ID:7)..
<ID:0/007> File analysis..
<ID:0/007> SetupConnection..
<ID:0/007> Initialzation..
<ID:0/007> Set PIT file..
<ID:0/007> DO NOT TURN OFF TARGET!!
<ID:0/007> Get PIT for mapping..
<ID:0/007> Firmware update start..
<ID:0/007> SingleDownload.
<ID:0/007> aboot.mbn
<ID:0/007> NAND Write Start!!
<ID:0/007> sbl1.mbn
<ID:0/007> rpm.mbn
<ID:0/007> tz.mbn
<ID:0/007> sdi.mbn
<ID:0/007> NON-HLOS.bin
<ID:0/007> boot.img
<ID:0/007> recovery.img
<ID:0/007> system.img.ext4
<ID:0/007> persist.img.ext4
<ID:0/007> modem.bin
<ID:0/007> Transmission Complete..
<ID:0/007> Now Writing.. Please wait about 2 minutes
<ID:0/007> Receive Response from boot-loader
<ID:0/007> cache.img.ext4
<ID:0/007> hidden.img.ext4
<ID:0/007> FAIL! (Write)
<ID:0/007>
<ID:0/007> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Any help here would be greatly appreciated...
I've tried following adivce regarding extracting the tar file and removing hidden then rezipping but it proves useless as changing the file extension seems to destabilise the file and Odin won't then recognise the new .tar.md5
Thanks
Hi,
I have the same problem as the previous guy but
when i try flash by using pit file it shows
ddi : mmc_read failed
ODIN MODE (HIGH SPEED)
PRODUCT NAME : SM-N915
CURRENT BINARY :Samsung Official
SYSTEM STATUS: Custom
REACTIVATION LOCK: OFF
KNOX WARRANTY VOID: 0x1 (0)
QUALCOMM SECUREBOOT ENABLE (CSB)
RP SWREV: S1, T1, R1, A1,P1,
SECURE DOWNLOAD: ENABELE
UDC START
ODIN: flash read failure
ERROR: There is no bit binary
SCURE CHECK FAIL : PIT
ODIN :Flash read failure
can you help please ?
The only workaround I find working is the wakelock app. Have it run and stay through the notification bar, and set it at 4. It kills the battery life, but at least it's responsive when I try to use it from locked state.Quote:
Now my sm-N915 note edge phon can not power up afeter to try flash .....i try to remove the battery and replace but still the phon is can not be power on. What i can do to power up and use the phone like as before !
Hello guys,
i bought a Galaxy Note 4, and it has Lollipop 5.0.1 but I want to Downgrade to kitkat 4.4.4
now i am confused what firmware to use with ODIN beacuse i don't know if i need 910F or 910V
1. About my Device shows: Model number SM-N910F
[ Login above or register to see download links. ]
and when i remove the battery, the sticker underneath is written SM-N910V
2. But I used an app called Phone Info + to get more info but the APP INFO gave the following information:
GENERAL INFO
Manufacturer: samsung
Brand: [ Login above or register to see download links. ]
Phone Model: SM-N910V
Device Type: trltevzw
Product Name: trltevzw
Country of Origin:
Manufacturing Date: 2014.10.13
Knox Warranty Void: 0x0
Colour:
Internal Storage: 32 GB
3. when i switch it off and Power ON+VOLUME DOWN+HOME BUTTON
it shows:
ODIN MODE (HIGH SPEED)
PRODUCT NAME : SM-N910V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD : ENABLE
UDC START
ALL I WANT TO DO IS DOWNGRADE IT TO 4.4.4 KITKAT
BUT I DONT WANT TO BRICK IT OR LOSE NETWORK(GET NETWORK LOCK)
PLEASE HELP ME, I AM NOT AN EXPERT IN THESE KIND OF THINGS BUT I HAVE SOME KNOWLEDGE
Hello guys,
i bought a Galaxy Note 4, and it has Lollipop 5.0.1 but I want to Downgrade to kitkat 4.4.4
now i am confused what firmware to use with ODIN beacuse i don't know if i need 910F or 910V
1. About my Device shows: Model number SM-N910F
[ Login above or register to see download links. ]
and when i remove the battery, the sticker underneath is written SM-N910V
2. But I used an app called Phone Info + to get more info but the APP INFO gave the following information:
GENERAL INFO
Manufacturer: samsung
Brand: Verizon
Phone Model: SM-N910V
Device Type: trltevzw
Product Name: trltevzw
Country of Origin:
Manufacturing Date: 2014.10.13
Knox Warranty Void: 0x0
Colour:
Internal Storage: 32 GB
3. when i switch it off and Power ON+VOLUME DOWN+HOME BUTTON
it shows:
ODIN MODE (HIGH SPEED)
PRODUCT NAME : SM-N910V
CURRENT BINARY: Samsung Official
SYSTEM STATUS: Official
REACTIVATION LOCK: OFF
QUALCOMM SECUREBOOT: ENABLE (CSB)
RP SWREV: S1, T2, R1, A2, P1
SECURE DOWNLOAD : ENABLE
UDC START
ALL I WANT TO DO IS DOWNGRADE IT TO 4.4.4 KITKAT
BUT I DONT WANT TO BRICK IT OR LOSE NETWORK(GET NETWORK LOCK)
PLEASE HELP ME, I AM NOT AN EXPERT IN THESE KIND OF THINGS BUT I HAVE SOME KNOWLEDGE
Hi thereQuote:
We can't help you in this
If your device is working OK now: let it this way
There's obviously messed with your device (hence SM-N910V & SM-N910F firmware on your device)